Stow RCC130H manual Assembly INSTRUCTIONS/OPERATIONS

Page 23

ASSEMBLY INSTRUCTIONS/OPERATIONS

5)Turn the height adjustment lever clockwise to lower the blade into the crack until the desired sawing depth is achieved. Each full turn of the crank lever will raise/lower the blade approximately 1/16 inch.

6)Following the random crack direction and/or pattern with the blade is accomplished by viewing the blade and crack in the louvered opening in the blade guard. The louvers are intended to provide protection for the operator in the event that a diamond segment becomes separated from the blade blank. Probable causes for such occurrences are discussed in detail in the Troubleshooting section of this manual.

a)The geometric design of the louvered blade guard is intended to provide a high mathematical percentage of protection for the operator in a normal operating position as described in this manual. The mathematical percentage will decrease for operating positions not described in this manual.

b)In the event of diamond segment separation from the blade blank, there is a high mathematical probability that the segment will be thrown forward against the dust pan located under the main frame or directly against the forward (non louvered) section of the blade guard. The manufacturer has conducted extensive testing to substantiate this theory. In actual field tests, diamond segments were purposely separated from the blade blanks through abusive operational techniques. In all field tests, no separated diamond segments made direct contact with the blade guard louvers.

c)In the very low probability that a diamond segment would make direct contact with the blade guard louvers, the geometric design has a high mathematical probability to not allow the segment to penetrate the vertical plane as defined by the location of the louvers. The spaces, angle orientation and number of louvers minimize the mathematical probability that a segment can penetrate the vertical plane, exit the louvers and eventually strike the operator.

d)The geometric configuration of the louvers are designed to allow for adequate and/or proper visibility for the operator during the sawing process. With use, concrete and/or asphalt dust will accumulate at the bottom of the blade guard opening. At regular intervals, this material should be removed to enhance operator visibility during the sawing process.

DANGER

DO NOT MODIFY THE ORIGINAL OPERATING CONFIGURATION FOR THE LOUVERS FOR ANY REASON. MODIFICATIONS TO THE LOUVERS CAN RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY.

7)Proper operator posture and stance will enhance operational safety and overall productivity. FIGURE 24 depicts a proper operator's position. FIGURE 25 depicts an improper operator's position that can accelerate fatigue, decrease productivity and reduce safety. The downcut orientation of the diamond blade will normally produce a "self-propelled" effect against the operator. This effect is intended to reduce the operator fatigue associated with the operation of the machine and to increase overall productivity.

8)In some operating conditions, it may be necessary for the operator to apply a resisting force (push) against the operator handle to counteract the "self-propelled effect. In some other operating conditions, it may be necessary for the operator to apply a force (pull with) to the operator handle in order to assist the sawing action of the Crack Saw.

FIGURE 24

RCC130H-CRACK SAW

OPERATION AND PARTS MANUAL REV #1 (11/18/04)

PAGE 23

 

 

 

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Gasoline Crack Saw Model RCC130H Page Table of Contents Table of Contents RCC130H-CRACK SAW Operation and Parts Manual REV #1 11/18/04 Stow Construction Equipment Parts Ordering ProceduresHere’s how to get help RCC130H-CRACK SAW Operation and Parts Manual REV #1 11/18/04 Model Number Serial Number Date of Purchase Operator Instructional Data Sheet Safety Precautions Safety Precautions Operation MAINTENANCE, Repair and Storage Filling the Engine Crankcase with OIL AssemblyBefore Starting the Engine Removing the Crack SAW from the PalletInformation Relative to the USE of Diamond Blades OperationTheory of Operation General Information Common Sense Personal Safety EquipmentInstalling a Diamond Blade on the Arbor Shaft StandardsAssembly INSTRUCTIONS/OPERATIONS Application All Models Transporting the Crack SAWGeneral Transportation Information Typical Hoisting ConfigurationProper Quantity of Personnel in Proper Physical Condition Assembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Assembly INSTRUCTIONS/OPERATIONS Types of Cracks Stopping the RCC130H Series Gasoline Powered Crack SawsWhy Do It at All? Basic definitionsPreparation and Application Equipment and MaterialsObserve all applicable safety precautions for the solvent MAINTENANCE/SERVICEMaintenance/Service Preventative Maintenance Check ListMAINTENANCE/SERVICE MAINTENANCE/SERVICE Application All Models MAINTENANCE/SERVICE MAINTENANCE/SERVICE Application All Models RCC130H Crack Saw Engine ServiceDiamond Segment Loss TroubleshootingTroubleshooting Engine Fails to StartBlade will not CUT Short Blade Service LifeUneven Segment Wear Segment CracksAccelerated V-BELT Wear Blade WobblesBlade Blank Damage Blade not Rotating with Proper ConcentricityStorage StorageGeneral SpecificationsFrame Items Found In the Remarks Column Explanation of Code in Remarks ColumnQty Description Suggested Spare PartsOperator Handle Assy Part Name Drivetrain and Engine Mounting Assy Drivetrain and Engine Mounting Assy Part Name QTY Remarks Frame Assy Frame Assy Part Name Dust Vacuum Port Assy SHROUD, Vacuum WET Cutting KIT Assy WET Cutting KIT Assy Part Name Decals Decals Freight Policy Special Expediting ServicePRICING, Rebates Specifications Payment TermsRCC130H-CRACK SAW Operation and Parts Manual REV #1 11/18/04 Heres HOW to GET Help

RCC130H specifications

The Stow RCC130H is an advanced compact ride-on compactor designed for efficient and powerful performance in various construction and road maintenance projects. Known for its reliability and versatility, the RCC130H is a popular choice among contractors and operators seeking optimal results in soil and asphalt compaction.

One of the key features of the RCC130H is its robust engine. Equipped with a high-performance diesel engine, the compactor provides excellent power and torque, enabling effective operation even in challenging terrains. The engine is designed for fuel efficiency, ensuring lower operational costs while delivering superior compaction force. The machine's hydraulic system is equally impressive, allowing smooth operation of the vibratory system that enhances productivity by increasing compaction density in less time.

User comfort is another priority in the design of the RCC130H. It features an ergonomic control layout that allows operators to easily reach all necessary functions, reducing fatigue during long hours of operation. The operator's platform is spacious and designed with optimal visibility in mind, enhancing safety and control when navigating through job sites.

The RCC130H showcases advanced compaction technologies, including dual amplitude settings. This feature lets operators choose between different settings depending on the material being compacted—whether it’s granular soils, cohesive materials, or asphalt. The machine’s heavy-duty drum is specially designed to maximize contact with the surface, ensuring uniform compaction results.

Durability is also a hallmark of the Stow RCC130H. Constructed with high-quality materials and components, the machine is built to withstand the rigors of demanding work environments. Its frame design offers stability and reduces the impact of vibrations on the operator, which enhances long-term comfort and control.

Maintenance is made simple with the RCC130H, featuring easy access points for routine checks and servicing. The design minimizes downtime, ensuring that the machine stays operational and productive on the job.

In summary, the Stow RCC130H is a feature-rich compact ride-on compactor designed for maximum efficiency and performance. With its powerful engine, ergonomic design, advanced compaction technology, and durable construction, the RCC130H is an excellent investment for those looking to enhance their compaction operations on various job sites.
Top Page Image Contents