TOOL STICKERS & TAGS
E
40 LPM
@ 138 BAR EHTMA
CATEGORY
12535
D
30 LPM @ 138 B AR EHTMA CATEGORY
11207
L
WA
108
29530
12535
Circuit “E” Decal – DS115000 Only 11207
Circuit “D” Decal – DS113000 Only
|
| 28409 |
03786 | 12412 | Composite Decal |
| ||
GPM Sticker (DS113000) | Warning Decal | |
03790 |
|
|
GPM Sticker (DS115000) |
|
|
71073 |
|
|
CE Tool Plate |
|
|
28409
71073
29530
Sound Level Decal
DANGER |
Failure to use hydraulic hose labeled
and certified as 
may result in
death or serious injury.
| For proper and safe operation read owners manual |
| and mwke sure that you have been properly |
| trained in correct procedures required for work |
ELECTROCUTION |
|
HAZARD | on or around electric lines. |
12412
|
|
|
|
|
|
|
| ||
| DO NOT EXCEED 2000 PSI / 140 BAR |
|
| DO NOT EXCEED 2000 PSI / 140 BAR |
| •DO NOT EXCEED SPECIFIED FLOW OR PRESSURE •USE |
|
| •DO NOT EXCEED SPECIFIED FLOW OR PRESSURE •USE |
|
|
| ||
| •USE |
|
| •USE |
| •CORRECTLY CONNECT HOSES TO TOOL ‘IN’ AND ‘OUT’ |
|
| •CORRECTLY CONNECT HOSES TO TOOL ‘IN’ AND ‘OUT’ |
| PORTS. •IMPROPER HANDLING, USE OR MAINTENANCE |
|
| PORTS. •IMPROPER HANDLING, USE OR MAINTENANCE |
| OF TOOL COULD RESULT IN A LEAK, BURST OR OTHER |
|
| OF TOOL COULD RESULT IN A LEAK, BURST OR OTHER |
| TOOL FAILURE. •CONTACT AT A LEAK OR BURST CAN |
|
| TOOL FAILURE. •CONTACT AT A LEAK OR BURST CAN |
| CAUSE OIL INJECTION INTO THE BODY. •FAILURE TO |
|
| CAUSE OIL INJECTION INTO THE BODY. •FAILURE TO |
| OBSERVE THESE PRECAUTIONS CAN RESULT IN SERIOUS |
|
| OBSERVE THESE PRECAUTIONS CAN RESULT IN SERIOUS |
| PERSONAL INJURY. |
|
| PERSONAL INJURY. |
|
|
|
|
|
03786 DS113000 | 03790 DS115000 |
The safety tag (p/n 15875) at right is attached to the tool when shipped from the factory. Read and understand the safety instructions listed on this tag before removal. We suggest you retain this tag and attach it to the tool when not in use.
D A N G E R
1.FAILURE TO USE HYDRAULIC HOSE LABELED AND CER- TIFIED AS
BEFORE USING HOSE LABELED AND CERTIFIED AS NON- CONDUCTIVE ON OR NEAR ELECTRIC LINES BE SURE THE HOSE IS MAINTAINED AS
2.A HYDRAULIC LEAK OR BURST MAY CAUSE OIL INJEC- TION INTO THE BODY OR CAUSE OTHER SEVERE PERSONAL INJURY.
A.DO NOT EXCEED SPECIFIED FLOW AND PRESSURE FOR THIS TOOL. EXCESS FLOW OR PRESSURE MAY CAUSE A LEAK OR BURST.
B.DO NOT EXCEED RATED WORKING PRESSURE OF HYDRAULIC HOSE USED WITH THIS TOOL. EXCESS PRESSURE MAY CAUSE A LEAK OR BURST.
C.CHECK TOOL HOSE COUPLERS AND CONNECTORS DAILY FOR LEAKS. DO NOT FEEL FOR LEAKS WITH YOUR HANDS. CONTACT WITH A LEAK MAY RESULT IN SEVERE PERSONAL INJURY.
I M P O R T A N T
READ OPERATION MANUAL AND SAFETY INSTRUCTIONS FOR THIS TOOL BEFORE USING IT.
USE ONLY PARTS AND REPAIR PROCEDURES APPROVED BY STANLEY AND DESCRIBED IN THE OPERATION MANUAL.
TAG TO BE REMOVED ONLY BY
TOOL OPERATOR.
SEE OTHER SIDE
D A N G E R
D.DO NOT LIFT OR CARRY TOOL BY THE HOSES. DO NOT ABUSE HOSE. DO NOT USE KINKED, TORN OR DAMAGED HOSE.
3.MAKE SURE HYDRAULIC HOSES ARE PROPERLY CON- NECTED TO THE TOOL BEFORE PRESSURING SYSTEM. SYSTEM PRESSURE HOSE MUST ALWAYS BE CON- NECTED TO TOOL “IN” PORT. SYSTEM RETURN HOSE MUST ALWAYS BE CONNECTED TO TOOL “OUT” PORT. REVERSING CONNECTIONS MAY CAUSE REVERSE TOOL OPERATION WHICH CAN RESULT IN SEVERE PERSONAL INJURY.
4.DO NOT CONNECT
5.BYSTANDERS MAY BE INJURED IN YOUR WORK AREA. KEEP BYSTANDERS CLEAR OF YOUR WORK AREA.
6.WEAR HEARING, EYE, FOOT, HAND AND HEAD PRO- TECTION.
7.TO AVOID PERSONAL INJURY OR EQUIPMENT DAMAGE, ALL TOOL REPAIR MAINTENANCE AND SERVICE MUST ONLY BE PERFORMED BY AUTHORIZED AND PROPERLY TRAINED PERSONNEL.
IM P O R T A N T
READ OPERATION MANUAL AND SAFETY INSTRUCTIONS FOR THIS TOOL BEFORE USING IT.
USE ONLY PARTS AND REPAIR PROCEDURES APPROVED BY STANLEY AND DESCRIBED IN THE OPERATION MANUAL.
TAG TO BE REMOVED ONLY BY
TOOL OPERATOR.
SEE OTHER SIDE
SAFETY TAG P/N 15875 (Shown smaller then actual size)
DS11 User Manual ◄ 7