SportDOG 100A To Locate a Break in the Boundary Wire, Terms of USE and Limitation of Liability

Page 13
Test Ground
Wire Wire

To Locate a Break in the Boundary Wire

Please follow these steps in determining where you have a break in your Boundary Wire:

1.Locate your original splice(s) and verify they have a good, solid connection.

2.Check your yard to determine any possible damage to the Boundary Wire (recent digging, aerating, rodent burrowing, or any other noticeable disturbance in your yard next to the Boundary Wire).

If you still cannot find the break in the Boundary Wire, there are two options for locating it:

Option 1: Contact the Customer Care Center at 1-800-732-0144 to purchase a Wire Break Locator (RFA-50) that will locate the break in the Boundary Wire.

Option 2: Follow the procedure below:

CAUTION To prevent an unintended correction, always remove your dog’s Collar Receiver before performing any Transmitter testing.

1.Unplug the Fence Transmitter.

2.Connect both ends of your twisted Boundary Wire to one Boundary Wire Terminal.

3.Measure and cut a Test Wire which is half the length of your total Boundary Wire

footage.

4. Connect one end of the Test Wire to the other Boundary Wire Terminal.

5. Locate the halfway point of your boundary and cut the Boundary Wire.

6. Splice the other end of the Test Wire to either side of your Boundary Wire where you cut it in half.

7. Plug in the Fence Transmitter and check the Loop Indicator Light. If the Loop Indicator Light is on you can assume the break is in the other half of the Boundary Wire.

8.If the Loop Indicator Light did not come on and you hear a continuous beep, you may assume there is a break in this portion of the Boundary Wire. However, there is a small chance of having more than one break in your system. Be sure to check both halves of your entire loop.

9.Replace the damaged Boundary Wire with new Boundary Wire.

10. Reconnect the Boundary Wire to the Fence Transmitter.

11. Check the Loop Indicator Light. If the Loop Indicator Light is on, test the system with the Collar Receiver.

___________________________________________

TERMS OF USE AND LIMITATION OF LIABILITY

1.TERMS OF USE

This Product is offered to you conditioned upon your acceptance without modification of the terms, conditions and notices contained herein. Usage of this Product implies acceptance of all such terms, conditions, and notices.

2.PROPER USE

This Product is designed for use with dogs where training is desired. The specific temperament of your dog may not work with this Product. We recommend that you not use this Product if your dog is less than 10 pounds or if your dog is aggressive. If you are unsure whether this is appropriate for your dog, please consult your veterinarian, certified trainer or contact our

Customer Care Center at 1-800-732-0144.

Proper use includes reviewing the entire Operating and Training Guide provided with your Product and any specific Caution statements.

3.NO UNLAWFUL OR PROHIBITED USE

This Product is designed for use with dogs only. This dog training device is not intended to harm, injure, or provoke. Using this Product in a way that is not intended could result in violation of Federal, State or local laws.

4.LIMITATION OF LIABILITY

In no event shall Radio Systems® Corporation be liable for any direct, indirect, punitive, incidental, special or consequential damages, or any damages whatsoever arising out of or connected with the use or misuse of this Product. Buyer assumes all risks and liability from the use of this Product.

5.MODIFICATION OF TERMS AND CONDITIONS

Radio Systems Corporation reserves the right to change the terms, conditions and notices under which this Product is offered.

24

1-800-732-0144

400-1178.indd

24-25

COMPLIANCE

FCC/Canada

This Class B digital apparatus complies with Canadian ICES-003. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction guide, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a practical installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Relocate the interfered receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Contact the Customer Care Center.

This device complies with Industry Canada Rules. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Unauthorized changes or modifications to the equipment, not approved by Radio Systems® Corporation, could result in not meeting compliance with FCC regulations and could void the user’s authority to operate the equipment.

Australia

This device complies with the applicable EMC requirements specified by the ACMA (Australian Communications and Media Authority).

___________________________________________

Customer Care International

Canada - Tel: 800-732-2677

Monday - Friday 8 AM - 8 PM / Saturday 9 AM – 5 PM

Australia - Tel: 1800 786 608

Monday - Friday 7:30 AM - 5 PM

New Zealand - Tel: 0800 543 054

Monday - Friday 10:30 AM - 7 PM

This product has the benefit of a 2 year warranty. Details of the warranty applicable to this product and its terms can be found at www.sportdog.com.

SPORTDOG.COM

25

3/5/10 4:28 PM

Image 13
Contents Operating & Training Guide Important Safety Information Components Other Items YOU MAY Need Table of ContentsKEY Definitions HOW the System WorksOperating Guide Locate the Fence Transmitter 3ftTo Twist the Boundary Wire 3A Position the Boundary WireTo Splice or Repair the Boundary Wire 3B Sample LayoutsAdditional Boundary Wire Ground Wire 4BBoundary Wire 4A Fuse Protection 4CPrepare the Collar Receiver To Insert and Remove the BatteryFunction and Response Table To Set the Stimulation LevelTo Bury the Boundary Wire Install the Boundary WireTo Attach the Boundary Wire to an Existing Fence Ollar Eceiver Place the Boundary FlagsBe Patient With Your Dog Day 1 Boundary Flag AwarenessDays 2 thru 4 Continue Boundary Flag Days 5 thru 8 Distraction PhaseAwareness Days 9 thru 14 Unleashed SupervisionAccessories Short Loop Test Additional InformationTerms of USE and Limitation of Liability To Locate a Break in the Boundary WireCompliance Customer Care InternationalMounting Template Layout GridCollar Receiver

100A specifications

The SportDOG 100A is a state-of-the-art electronic collar designed for training dogs, particularly hunting and sporting breeds. This device is engineered to deliver reliable performance for both novice pet owners and professional trainers, making it one of the most sought-after tools in the market today.

One of the standout features of the SportDOG 100A is its impressive range. With a transmit distance of up to 1000 yards, this collar allows trainers to maintain control and communication with their dogs even from a significant distance. This is particularly beneficial during field training sessions or hunting expeditions, where the dog may be far from the handler.

The SportDOG 100A incorporates 7 levels of stimulation, allowing users to tailor the intensity of the correction to suit their dog’s temperament and training needs. This gradual approach to stimulation can reinforce positive behaviors and discourage unwanted actions without causing excessive stress to the animal. Additionally, the collar features a tone and vibration mode, providing alternative training options that cater to different learning styles.

Durability is another critical characteristic of the SportDOG 100A. This collar is waterproof and submersible, making it suitable for use in various weather conditions. Whether it's a rainy day or a dive into a lake, the SportDOG 100A continues to function flawlessly, showcasing its rugged build quality designed specifically for outdoor use.

The collar is powered by a rechargeable lithium-ion battery, which offers a robust runtime. Users can expect up to 70 hours of continuous use on a single charge, ensuring that the collar is ready for training sessions without frequent interruptions. The battery indicator helps users keep track of charge levels, eliminating the guesswork associated with battery life.

Moreover, the SportDOG 100A showcases a sleek and ergonomic design that ensures comfort for the dog during extended wear. The adjustable strap accommodates various neck sizes, securing a snug fit to prevent slippage while maintaining the dog’s comfort.

Overall, the SportDOG 100A stands out in the realm of dog training collars with its impressive range, customizable stimulation options, durability, and user-friendly features. This collar is an ideal choice for anyone looking to enhance their dog's training experience while ensuring their safety and comfort. Whether used in professional training or casual outings, the SportDOG 100A proves to be a reliable companion for both dogs and handlers alike.