Shindaiwa AHS242es, X7502801200 manual Filling the Fuel Tank, Starting the Engine

Page 11

Mixing Instructions

1.Fill an approved fuel container with half of the required amount of gasoline.

2.Add the proper amount of engine oil to gasoline.

3.Close container and shake to mix oil with gaso- line.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT!

Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut- off containers to reduce fuel spillage.

After use

•DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel stor- age container.

Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied build- ing, away from sparks and flames.

IMPORTANT!

Stored fuel may separate. ALWAYS shake fuel con- tainer thoroughly before each use.

Filling the Fuel Tank

WARNING!

Minimize the Risk of Fire ■■NEVER smoke or light fires near

the engine.

■■ALWAYS stop the engine and allow it to cool before refueling.

■■ALWAYS Wipe all spilled fuel and move at least 3 meters (10 feet) from the fueling point and source before starting.

■■NEVER place flammable material close to the engine muffler.

■■NEVER operate the engine without the muffler and spark arrester screen in place and in good working condition.

■■FUEL IS HIGHLY FLAMMABLE.

■■ALWAYS store gasoline in a container approved for flammable liquids.

■■ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank. If fuel leaks are evident, stop using the unit immediately. Fuel leaks must be repaired before using the unit.

■■ALWAYS move the unit at least 3 meters (10 feet) away from a fuel storage area or other readily flam- mable materials before starting the engine.

1.Place the unit on a flat, level sur- face.

2.Clear any dirt or other debris from around the fuel filler cap.

CAUTION!

Slowly remove the fuel cap only after stopping the engine.

3.Remove the fuel cap, and fill the tank with clean, fresh fuel.

4.Reinstall the fuel filler cap and tighten firmly.

5.Wipe away any spilled fuel before starting engine.

Starting the Engine

IMPORTANT!

Engine ignition is controlled by a two position switch mounted on the throttle housing labeled, “I” for ON or START and “O” for OFF or STOP.

NOTE:

The blade cover is used for transportation and storage. Remove blade cover before using the unit.

WARNING!

Never start the engine from the operating position.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents AHS242 Articulated Hedge Trimmer Introduction ContentsSafety Safety and Operational LabelsOperating Precautions Tion labels are undamaged and readable Safety Equipment and LabelsProduct Description Operator SafetyEmission Control Exhaust & Evaporative SpecificationsAdjusting the Hedge Trimmer Cutter Assembly AssemblyPrior To Assembly Throttle lever free play Travel limiter and adjustment rangeAdjusting cutter assembly for storage or transportation Fuel Requirements Mixing FuelStarting the Engine Filling the Fuel TankOpen Starting a flooded engine When the Engine StartsChecking Unit Condition If the engine does not startWorking Position General maintenanceSafe Operation Before trimmingDaily Maintenance MaintenanceGearcase lubrication Hour maintenance More frequently in dusty conditionsCover.CAUTION Remove and replace the fuel filter element Hour Maintenance Long Term Storage Carburetor Adjustment Engine Break-InAdjusting Engine Idle Idle Speed AdjustmentTroubleshooting Guide Engine is knocking Engine stops abruptly Poor accelerationExceptions Purchased Repair Parts and Accessories 01/2010 Page Page Parts/Serial Number Servicing Information

AHS242es, X7502801200 specifications

The Shindaiwa AHS242es is a highly regarded hedge trimmer known for its powerful performance and user-friendly design. As a part of the Shindaiwa family of outdoor power equipment, this model is engineered for both professional landscapers and home gardeners seeking to achieve precision in their hedge trimming tasks.

One of the main features of the AHS242es is its robust 24.5cc, 2-stroke engine. This engine provides a perfect blend of power and efficiency, delivering enough torque to cut through even the toughest hedges with ease. With an output of 0.8 kW, it's designed to tackle a variety of trimming jobs without the need for excessive effort or downtime.

The AHS242es is equipped with a double-sided 24-inch blade, allowing for efficient and fast cutting in both directions. The blades are crafted from high-quality materials, ensuring durability and long-lasting sharpness. The design promotes a clean cut, which not only enhances the aesthetic appeal of trimmed hedges but also promotes healthier plant growth.

Weight is an important consideration when choosing a hedge trimmer, and Shindaiwa has made the AHS242es lightweight at just 5.5 kg. This reduced weight facilitates prolonged use without causing fatigue, making it perfect for long trimming sessions. Additionally, the ergonomic handle design enhances comfort and control during operation.

An attractive feature of the AHS242es is its easy-start system. This technology reduces the effort needed to start the engine, allowing users to get to work quickly without the frustration of persistent pull starts. The anti-vibration system integrated into the design further enhances the user experience, minimizing fatigue and improving comfort when operating the trimmer.

Safety is also a primary consideration in the design of the AHS242es. It comes equipped with a protective blade cover, ensuring safe storage and transport while reducing the risk of accidental injuries. Moreover, the fuel-efficient engine complies with emission regulations, promoting an environmentally friendly approach to landscaping.

In summary, the Shindaiwa AHS242es hedge trimmer, characterized by its powerful engine, lightweight design, long-lasting blades, user-friendly features, and safety mechanisms, stands out as a reliable tool for anyone looking to maintain their hedges effectively and efficiently. With its blend of technology and thoughtful design, it continues to be a popular choice for both professionals and enthusiasts alike.
Top Page Image Contents