Shindaiwa AHS242es Checking Unit Condition, When the Engine Starts, If the engine does not start

Page 13

Starting the Engine (continued)

When the Engine Starts...

■■After the engine starts, allow the engine to warm up at idle 2 or 3 minutes before operating the unit.

■■If the engine does not continue to run, repeat the appropriate crank- ing procedures for a cold or warm engine.When the engine starts, clear excess fuel from the combus- tion chamber by accelerating the engine several times with the throt- tle lever.

■■Advancing the throttle makes the cutting attachment move faster; releasing the throttle permits the attachment to stop moving. If the cutting attachment continues to move when the engine returns to idle, carburetor idle speed should be adjusted (see “Adjusting Engine Idle”.).

If the engine does not start

■■Repeat the appropriate starting pro- cedure for a cold or warm engine.

■■If the engine still fails to start, use the procedures for “Starting a flooded engine.”

Starting a flooded engine

WARNING!

Burn danger from hot engine!

1.Slide the ignition switch to the “I” (ON) position.

2.Open the choke, put the throttle lever in the full throttle position, then clear excess fuel from the combustion chamber by cranking the engine several times.

3.If the engine still fails to start or fire, refer to the troubleshooting flow chart at the end of this manual.

Stopping the Engine

Idle the engine briefly before stopping (about 2 minutes), then slide the ignition switch to the “O” (Engine OFF) position.

WARNING!

The cutting attachment can continue moving after the engine is stopped!

OFF

Slide ignition switch to OFF

Checking Unit Condition

NEVER operate the unit with the pro- tective devices removed!

Use only authorized Shindaiwa parts and accessories with your Shindaiwa hedge trimmer. Do not make modifica- tions to this unit without written approv- al from Shindaiwa.

ALWAYS make sure the cutting attach- ment is properly installed and firmly tightened before operation.

NEVER use a cracked or warped cutting attachment: replace it with a serviceable one.

ALWAYS make sure the cutting attach- ment fits properly into the appropriate attachment holder. If a properly in- stalled attachment vibrates, replace the attachment with new one and re-check.

ALWAYS stop the engine immediately and check for damage if you strike a for- eign object or if the unit becomes tangled. Do not operate with broken or damaged equipment.

NEVER allow the engine to run at high speeds without a load. Doing so could damage the engine.

NEVER operate a unit with worn or damaged fasteners or attachment holders.

WARNING!

A cutting attachment shield or other protective device is no guarantee of protection against ricochet. YOU MUST ALWAYS GUARD AGAINST FLYING DEBRIS!

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents AHS242 Articulated Hedge Trimmer Introduction ContentsSafety Safety and Operational LabelsOperating Precautions Tion labels are undamaged and readable Safety Equipment and LabelsProduct Description Operator SafetyEmission Control Exhaust & Evaporative SpecificationsPrior To Assembly AssemblyAdjusting the Hedge Trimmer Cutter Assembly Adjusting cutter assembly for storage or transportation Travel limiter and adjustment rangeThrottle lever free play Fuel Requirements Mixing FuelStarting the Engine Filling the Fuel TankOpen Checking Unit Condition When the Engine StartsIf the engine does not start Starting a flooded engineSafe Operation General maintenanceBefore trimming Working PositionDaily Maintenance MaintenanceCover.CAUTION Hour maintenance More frequently in dusty conditionsGearcase lubrication Remove and replace the fuel filter element Hour Maintenance Adjusting Engine Idle Carburetor Adjustment Engine Break-InIdle Speed Adjustment Long Term StorageTroubleshooting Guide Engine is knocking Engine stops abruptly Poor accelerationExceptions Purchased Repair Parts and Accessories 01/2010 Page Page Parts/Serial Number Servicing Information

AHS242es, X7502801200 specifications

The Shindaiwa AHS242es is a highly regarded hedge trimmer known for its powerful performance and user-friendly design. As a part of the Shindaiwa family of outdoor power equipment, this model is engineered for both professional landscapers and home gardeners seeking to achieve precision in their hedge trimming tasks.

One of the main features of the AHS242es is its robust 24.5cc, 2-stroke engine. This engine provides a perfect blend of power and efficiency, delivering enough torque to cut through even the toughest hedges with ease. With an output of 0.8 kW, it's designed to tackle a variety of trimming jobs without the need for excessive effort or downtime.

The AHS242es is equipped with a double-sided 24-inch blade, allowing for efficient and fast cutting in both directions. The blades are crafted from high-quality materials, ensuring durability and long-lasting sharpness. The design promotes a clean cut, which not only enhances the aesthetic appeal of trimmed hedges but also promotes healthier plant growth.

Weight is an important consideration when choosing a hedge trimmer, and Shindaiwa has made the AHS242es lightweight at just 5.5 kg. This reduced weight facilitates prolonged use without causing fatigue, making it perfect for long trimming sessions. Additionally, the ergonomic handle design enhances comfort and control during operation.

An attractive feature of the AHS242es is its easy-start system. This technology reduces the effort needed to start the engine, allowing users to get to work quickly without the frustration of persistent pull starts. The anti-vibration system integrated into the design further enhances the user experience, minimizing fatigue and improving comfort when operating the trimmer.

Safety is also a primary consideration in the design of the AHS242es. It comes equipped with a protective blade cover, ensuring safe storage and transport while reducing the risk of accidental injuries. Moreover, the fuel-efficient engine complies with emission regulations, promoting an environmentally friendly approach to landscaping.

In summary, the Shindaiwa AHS242es hedge trimmer, characterized by its powerful engine, lightweight design, long-lasting blades, user-friendly features, and safety mechanisms, stands out as a reliable tool for anyone looking to maintain their hedges effectively and efficiently. With its blend of technology and thoughtful design, it continues to be a popular choice for both professionals and enthusiasts alike.
Top Page Image Contents