Shindaiwa X7502800900, T242 Stopping the Engine, Checking Unit Condition, When the Engine Starts

Page 12

Starting the Engine (continued)

When the Engine Starts...

nAfter the engine starts, allow the engine to warm up at idle 2 or 3 minutes before operating the unit.

nAdvancing the throttle makes the cutting attachment turn faster; releasing the throttle permits the attachment to stop turning. If the cutting attachment continues to rotate when the engine returns to idle, carburetor idle speed should be adjusted (see “Adjusting Engine Idle” below).

Starting A Flooded Engine

1.Slide the ignition switch to the “I” (ON) position.

2.Open the choke, put the throttle lever in the full throttle position, then clear excess fuel from the combustion chamber by cranking the engine several times.

3.If the engine still fails to start or fire, refer to the troubleshooting flow chart at the end of this manual.

Stopping the Engine

Idle the engine briefly before stopping (about 2 minutes), then slide the ignition switch to the “O” (Engine OFF) position.

OFF

251029

Figure 19

Checking Unit Condition

NEVER operate the unit with the cutting attachment shield or other protective devices removed!

WARNING!

A cutting attachment shield or other protective device is no guarantee of protection against ricochet. YOU MUST ALWAYS GUARD AGAINST FLYING DEBRIS!

Use only authorized Shindaiwa parts and accessories with your Shindaiwa trimmer. Do not make modifications to this unit without written approval from Shindaiwa.

ALWAYS make sure the cutting attachment is properly installed and firmly tightened before operation.

NEVER use a cracked or warped cutting attachment: replace it with a serviceable one.

ALWAYS make sure the cutting attachment fits properly into the appropriate attachment holder. If a properly installed attachment vibrates, replace the attachment with new one and re-check.

ALWAYS stop the engine immediately and check for damage if you strike a foreign object or if the unit becomes tangled. Do not operate with broken or damaged equipment.

NEVER allow the engine to run at high RPM without a load. Doing so could damage the engine.

NEVER operate a unit with worn or damaged fasteners or attachment holders.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents T242 Trimmer Contents IntroductionSafety Instructions Work SafelyStay Alert Minimize the Risk of FireSafety Labels Properly Equipped OperatorProduct Description Be Aware of the Working EnvironmentSpecifications Emission Control Exhaust & EvaporativeAssembly and Adjustments Prior to AssemblyAdjust Throttle Lever Free Play Front handle installationAssembly Install the Cutting Attachment Shield T242Trimmer Head Install the Trimmer Head Mixing Fuel Examples of 501 mixing quantitiesFilling the fuel tank Mixing InstructionsAfter use Starting the Engine When the Engine Starts Stopping the EngineChecking Unit Condition Starting a Flooded EngineMaintenance General maintenanceCutting Grass-Units equipped with a trimmer head Engine Operating SpeedsDaily Maintenance Hour MaintenanceMuffler Spark Plug10/15-Hour Maintenance Remove and replace Filter elementCarburetor Adjustment Engine Break-InHigh Altitude Operation Adjusting Engine Idle Idle Speed AdjustmentLong Term Storage Troubleshooting Guide Engine is knocking Poor acceleration Engine stops abruptlyExceptions Purchased Repair Parts and Accessories 99922201031 06/2010Manufacturers Warranty Coverage 99922201033Servicing Information Parts/Serial Number

X7502800900, T242 specifications

The Shindaiwa T242 is a powerful and reliable trimmer designed for both professional landscapers and homeowners seeking an efficient tool for their yard maintenance needs. With its robust engine and advanced features, the T242 stands out in the competitive outdoor power equipment market.

One of the main features of the Shindaiwa T242 is its 21.2 cc, two-stroke engine, which delivers impressive power and efficiency. The engine is designed to reduce emissions, adhering to environmental regulations while still providing sufficient torque for cutting through thick grass and dense vegetation. The lightweight design of the trimmer allows for extended use without causing excessive fatigue, making it ideal for both small and large landscaping tasks.

Another notable characteristic of the T242 is its Easy Start system, which simplifies the starting process. This technology reduces the amount of effort needed to start the engine, enabling users to get to work quickly without the frustration that often comes with pull-start engines. The trimmer also features a high-capacity fuel tank that allows for longer operation times between refueling, further enhancing productivity.

The Shindaiwa T242 is equipped with a commercially rated, dual-line bump feed head, providing users with the ability to easily advance the line by tapping it against the ground. This feature is particularly useful for users who need to maintain their trimmer without having to stop and manually feed the line. The cutting width of 17 inches makes it versatile enough for both trimming around tight areas and clearing larger sections of grass.

Durability is another strong suit of the T242, as it is constructed with high-quality materials that are built to withstand tough conditions. The trimmer’s design includes vibration-dampening technology, which minimizes user fatigue and allows for greater control while operating the machine.

In addition, the T242 features an ergonomic handle design that provides optimal comfort and grip, ensuring that users can operate the trimmer for extended periods without discomfort. The adjustable handle allows users to customize their grip position based on their height and preference, further enhancing the overall user experience.

In conclusion, the Shindaiwa T242 trimmer combines power, efficiency, and user-friendly features in a lightweight and durable package. It is an excellent choice for anyone looking to tackle landscaping tasks with ease and confidence, making it a valuable addition to any outdoor equipment arsenal.
Top Page Image Contents