Shindaiwa 81606, T272X/EVC, T272/EVC manual Introduction, Contents

Page 2

Introduction

Attention Statements

The Shindaiwa 272-series hand-held Power Equipment has been designed and built to deliver superior performance and reliabil- ity without compromise to quality, comfort, or durability.

Shindaiwa high performance engines rep- resent the leading edge of 2-cycle engine technology, delivering exceptionally high power from remarkably low displacement and weight. As an owner/operator, you’ll soon discover for yourself why Shindaiwa is simply in a class by itself!

IMPORTANT!

The information contained in this manual describes units available at the time of publication.

While every attempt has been made to give you the very latest information about your Shindaiwa product, there may be some dif- ferences between your 272-series unit and what is described here. Shindaiwa Inc. reserves the right to make changes to prod- ucts without prior notification, and without obligation to make alterations to units previ- ously manufactured.

WARNING!

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Throughout this manual are special “attention statements”.

WARNING!

A statement preceded by the triangular attention symbol and the word “WARNING” contains informa- tion that should be acted upon to prevent serious bodily injury.

CAUTION!

A statement preceded by the word “CAUTION” contains information that should be acted upon to prevent mechanical damage.

IMPORTANT!

A statement preceded by the word “IMPORTANT” is one that possesses special significance.

NOTE:

A statement preceded by the word “NOTE” contains information that is handy to know and may make your job easier.

Read and follow this operators manual. Failure to do so could result in serious injury.

Wear eye and hearing protection at all times during the operation of this unit.

Keep bystanders

at least 50 feet (15 m) away during operation.

Beware of thrown or ricocheted objects.

Do not operate this unit with a blade unless the unit is equipped with a Shindaiwa-approved handlebar or barrier.

Always wear a harness when operating this unit with a blade. A harness is also recommended when using trimmer line.

If unit is used as a brushcutter, beware of blade thrust. A jammed blade can cause the unit to jerk suddenly and may cause the operator to lose control of the unit.

Contents

 

 

PAGE

General Safety Instructions

3

Safety Labels

3

Product Description

5

Specifications

5

Assembly

6

Mixing fuel

9

Filling the fuel tank

9

Starting the Engine

10

Stopping the Engine

11

Engine Idle Adjustment

11

Operation

12

Maintenance

14

Long Term Storage

16

Troubleshooting Guide

17

Warranty Statement

20

IMPORTANT!

The operational procedures described in this manual are intended to help you get the most from your unit, and to pro- tect you and others from harm. These procedures are guidelines for safe operation under most conditions, and are not intended to replace any safety rules and/or laws that may be in force in your area. If you have questions regarding your 272-series unit, or if you do not understand something in this manual, your Shindaiwa dealer will be glad to assist you. You may also contact Shindaiwa, Inc. at the address printed on the back of this manual.



Image 2
Contents T272/EVC Trimmer T272X/EVC Trimmer Contents IntroductionWork Safely General Safety InstructionsSafety Labels Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentSpecifications T272/T272X Product DescriptionAdjusting Throttle Level Free Play T272/T272X AssemblyPrior to Assembly Handle T272/T272XSub-Shield T272X Install trimmer headCutting Attachment Shield T272/T272X Never operate the T272X without the safety clip in place Mount the Cutting Blade T272XExamples of 501 mixing quantities Mixing fuelFilling the fuel tank Minimize the Risk of FireSet the choke lever to the Closed posi When the Engine StartsStarting the Engine Stopping the Engine Engine Idle AdjustmentIdle Speed Adjustment Checking Unit ConditionOperation Brushcutter Shoulder Strap Using a Blade T272XUsing a Blade Blade ThrustMaintenance Fuel Filter Maintenance Shindaiwa Tornado Blade Long Term StorageBlade Sharpening Multiple-tooth Circular BladeTroubleshooting Guide What To Check Possible Cause RemedyLOW Power What To Check Engine stops abruptlyEmission System Warranty Statement Consiguientes Daños Por administrada es garantía EstaEmisión de Sistema del Garantía de Declaración Garantía Esta Por Cubierto Está QueContinuación Diagnostico Guia 19SPRemedio Causa Posible Revisar Qué 18SPDiagnostico Guia 17SPMúltiples Dientes de Discos Discos de AfiladoPlazo Largo de Almacenamiento Dvertencia¡AHoras-50 Cada Mantenimiento Continuación MantenimientoHoras-135 Cada Mantenimiento 15SPMantenimiento Continuación Operación Operación Motor del Parada Unidad La De Condición La VerifiqueMotor del Mínima Marcha de Ajuste 10SP Motor del ArranqueMotor el arranca Cuando Incendios! de riesgo el Disminuya Combustible de Tanque el LlenandoCombustible de Mezcla De proporción a mezclaT272X Disco/Cuchilla Ensamblaje Corte de Cuchilla la MonteEnsamblaje Mango el Ajustar Para EnsamblajeAcelerador del Palanca la de Holgura la de Ajuste T272/T272X Mango5SP T272X/C272 EspecificacionesProducto del Descripción 4SP Trabajo de Area del Alerta EstéEquipado Debidamente Operario El Juicio Buen Use Seguridad de EtiquetasSeguridad de Generales Instrucciones Alerta MantengaseSeguridad de Declaraciones Introducción 11/06 .Rev 81606 part de Numero