Turtle Beach TBS2170 warranty Setting up the Xbox 360 and Ear Force, X41 power cable

TOSLINK cable

included with the X41

XBOX 360

Setting up the XBOX 360 and Ear Force X41

STEP 1: Connect the XBOX to the X41 Transmitter

1. Connect the XBOX 360 AV cable to your XBOX as described in the XBOX User’s Guide.

2. Connect the X41 TOSLINK digital optical cable (included) from the digital output on the XBOX AV cable (1) to the digital input on the transmitter (2).

Note: Remove the protective caps from each end of the optical cable before inserting it into the sockets.

Step 2: Connect the power

1.Connect the X41 DC power cable to the X41 power socket (3). Plug the other side into a free USB port on the XBOX.

2.Press the power switch (4). Check if

the X41 front panel LEDs turn on.

X41 AV Cable
	IN
	DIGITAL
	OUT
	X41 transmitter
	rear view
X41 power cable
	DC 5V
	+
Insert the X41 USB	-
connector into a	POWER
USB port on the XBOX

Insert the batteries with the positive side down.

Step 3: Insert the headset batteries

1. Remove the battery cover in the right ear cup by pushing in and down.

2.Insert the two included AAA batteries with the positive side facing down.

3.Replace the battery cover.

Step 4: Insert the mic boom

1.Insert the mic boom into the jack (5) so that the holes in the mic casing are facing your mouth.

2.Place the foam cover over the mic if desired.

+ AAA BATTERY - + AAA BATTERY -

To remove the battery cover, push in and push down.

Remove and replace the foam cover so you can see the mic position.

Insert the boom so that the holes in the mic casing and the marker on the jack are facing your mouth.

EFFECTS

POWER

Page 8