Shindaiwa 62640-94313 manual Assembly Adjust Throttle Lever Free Play

Page 7

Assembly: Adjust Throttle Lever Free Play

The throttle lever free play should be ap- proximately 3/16-1/4 inch (4-6 mm). See Figure 10. Make sure that the throttle lever operates smoothly without binding. If it becomes necessary to adjust the lever free play, follow the procedures and illus- trations that follow.

3/16-1/4 inch (4-6 mm) Throttle Free play

Figure 10

Figure 11

1.Loosen the air cleaner cover knob and remove the air cleaner cover. See Figure 11.

2.Loosen the lock nut on the cable ad- juster. See Figure 12.

3.Turn the cable adjuster in or out as required to obtain proper free play 3/16-1/4 inch (4-6 mm). See Figure 12.

4.Tighten the locknut.

Cable

Adjuster

Lock

Nut

Figure 12

5. Reinstall the air cleaner cover.

Adjusting the Hedge Trimmer Cutter Assembly

WARNING!

nThe cutter blades are very sharp. Do not grasp the blades with your hands. Do not brush the blades against your body.

nNever run the engine nor operate the articulated hedge trimmer when the cutter assembly is in the stor- age/transport position.

IMPORTANT!

Always use gloves when working near the cutter assembly.

Position the hedge trimmer on a flat, level surface with the engine resting on the fuel tank guard. Make sure the scabbard is in place on the blade.

1.With your right hand, grasp the handle, located immediately behind the hand guard. With your left hand, grip the ad- justment lever on the cutter assembly. See Figure 13.

IMPORTANT!

The latch lock provides an interlock to help prevent inadvertent depression of the latch release.

Adjustment Lever

Figure 13

2.With the index finger of your left hand, press the latch release. With your left thumb, press the latch lock.

See Figure 14.

Latch Release

Latch Lock

Figure 14

3.While holding the latch lock down, pivot the cutter assembly using the adjust- ment lever until it is straight with the outer tube (pivot 180°).

See Figure 15.

Adjustment Lever

Figure 15

4.Release the latch lock and the latch release. Make sure the latch lock and the latch release return securely to a locking position.

5.Remove the scabbard from the cutter blade. The engine now may be started.

Adjusting the Hedge Trimmer Cut- ter Assembly for Desired Cutting Angles

270°

Various blade

positions possible

 

120°

The cutter assembly can be adjusted to 10 different positions rang- ing from 120° to 270° from the outer tube as shown in Figure 14. Refer to the steps on the previous page for adjust- ment procedures. Al- ways make sure the lock latch is securely locked after each adjustment.

Figure 16

WARNING!

Do not touch the cutter blades when the engine is running. The blades can oscillate even if the engine is idling.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents AH2510 Articulated Hedge Trimmer Safety Instructions ContentsIntroduction Operating Precautions Safety Equipment and LabelsSecure long hair so it is above shoulder level Operating the Articulated Hedge TrimmerSpecifications Prior To AssemblyProduct Description Throttle Cable Assembly AH2510Adjusting the Hedge Trimmer Cutter Assembly Assembly Adjust Throttle Lever Free PlayExamples of 501 mixing quantities Adjusting the Cutter Assembly for Storage or TransportationMixing Fuel Filling the Fuel TankStarting the Engine When the Engine StartsStarting a Flooded Engine Idle Speed Adjustment Adjusting Engine IdleStopping the Engine Spark Plug General MaintenanceDaily Maintenance MufflerEvery 10 to 15 hours of operation Cutter Blade AdjustmentHour Maintenance 10/15-Hour MaintenanceValve Adjustment 139/150-Hour MaintenanceServicing the fuel filter Long Term Storage Spark Arrester Screen MaintenanceRemedy Troubleshooting GuideWhat To Check Possible CauseSymptom Possible Cause Remedy Additional ProblemsThis Warranty is Administered by Page

62640-94313 specifications

Shindaiwa 62640-94313 is a premier product renowned for its advanced technology and reliable performance. This high-quality component is primarily designed for outdoor power equipment, catering to both professional landscapers and those who maintain their own lawns. Its robust construction and innovative features make it a go-to choice for anyone looking to enhance their gardening tools.

One of the standout characteristics of the Shindaiwa 62640-94313 is its ergonomic design, which ensures ease of use over extended periods. The handle is crafted to provide a comfortable grip, reducing user fatigue when performing repetitive tasks. This attention to user comfort, combined with the lightweight nature of the unit, allows for effortless maneuverability.

In addition to comfort, the Shindaiwa 62640-94313 boasts powerful performance capabilities driven by its durable engine. This high-performance engine provides ample power for a variety of outdoor applications, ensuring that users can tackle any gardening or landscaping challenge with confidence. The engine is designed to deliver a reliable start and consistent operation, a critical feature when working on larger or more complex tasks.

Another important aspect of the Shindaiwa 62640-94313 is its advanced emissions technology, which aligns with modern environmental regulations. The product minimizes harmful emissions while maximizing fuel efficiency, making it an eco-friendly choice for conscientious users. This balance of power and environmental responsibility sets the Shindaiwa 62640-94313 apart in today's competitive market.

The construction of this component incorporates high-grade materials that enhance durability, ensuring that it can withstand the rigors of frequent use. Whether it's trimming, edging, or clearing, the Shindaiwa 62640-94313 is built to last, providing reliability in various outdoor conditions.

Maintenance is also straightforward, which is a crucial feature for busy professionals and homeowners alike. Easy access to key components simplifies upkeep, allowing users to focus more on their tasks rather than spending excessive time on preventative measures.

In summary, the Shindaiwa 62640-94313 is an exceptional product that combines comfort, power, and durability. Its user-friendly design and eco-conscious performance make it a top choice for anyone seeking a reliable tool for outdoor work. Whether for commercial use or personal projects, the Shindaiwa 62640-94313 is engineered to meet the challenges of modern landscaping head-on.
Top Page Image Contents