Shindaiwa EB344EF13, X7501930200 manual Purchased Repair Parts and Accessories

Page 23

PURCHASED REPAIR PARTS AND ACCESSORIES

90-day all applications

ATTENTION ENGINE POWERED PRODUCT OWNERS

This Shindaiwa engine powered product is a quality-engineered unit which has been manufactured to exact tolerances to provide superior performance. To help ensure the performance of the unit, it is required to use engine oil which meets the ISO-L-EGD Standard per ISO/CD 13738 and JASO M345/FD Standards. Shindaiwa Red ArmorTM and Shindaiwa OneTM are a premium engine oil specifi cally formulated to meet ISO-L-EGD (ISO/CD 13738) and JASO M345/FD Standards. The use of engine oils designed for other applications, such as for outboard motors or lawnmowers can result in severe engine damage, and will void your engine limited warranty.

THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY:

Lack of lubrication or engine failure, due to the use of engine oils that do not meet the ISO-L-EGD (ISO/CD 13738) and JASO M345/FD Standards. Shindaiwa Red ArmorTM and Shindaiwa OneTM Engine Oil meets the ISO-L-EGD and JASO M345/FD Standard. Emission related parts are covered for 2 years regardless of engine oil used, per the statement listed in the EPA or California Emission Control Warranty Explanation.

Damage caused by use of gasohol, containing methanol (wood alcohol), or gasoline containing less than 89 octane. Only use gasoline which contains 89 octane or higher. Gasohol which contains a maximum 10% ethanol (grain alcohol) or 15% MTBE (methyl/tertiary/butyl/ether) is also approved. The prescribed mixing ratio of gasoline to oil is listed on the Shindaiwa oil label and covered in your operator’s manual.

Engine damage caused by use of ether or any starting fl uids.

Damage caused by tampering with engine speed governor or emission components, or running engines above specifi ed and recommended engine speeds as listed in your operator’s manual.

Operation of the unit with improperly maintained/removed cutting shield or removed/damaged air fi lter.

Damage caused by dirt, pressure or steam cleaning the unit, salt water, corrosion, rust, varnish, abrasives, and moisture.

Defects, malfunctions or failures resulting from abuse, misuse, neglect, modifi cations, alterations, normal wear, improper servic- ing, or use of unauthorized attachments.

Incorrect storage procedures, stale fuel, including failure to provide or perform required maintenance services as prescribed in the operator’s manual. Preventative maintenance as outlined in the operator’s manual is the customer’s responsibility.

Failures due to improper set-up, pre-delivery service or repair service by anyone other than authorized Shindaiwa servicing dealer during the warranty period.

Certain parts and other items are not warranted, including but not limited to: lubricants, starter cords, and engine tune-ups.

Use of spark plugs other than those meeting performance and durability requirements of the OEM spark plug listed in the Opera- tor’s Manuals.

Overheating or carbon scoring failures due to restricted, clogged exhaust port or combustion chamber, including damage to spark arrester screen.

Adjustments after the fi rst (30) thirty days and beyond, such as carburetor adjustment and throttle cable adjustment.

Damage to gears or gear cases caused by contaminated grease or oil, use of incorrect type or viscosity of lubricants, and/or failure to comply with recommended grease or oil change intervals.

Damage caused by pump or sprayer running dry, pumping or spraying caustic or fl ammable materials, or lack of or broken strainers.

Additional damage to parts or components due to continued use after operational problem or failure occurs. Should operational problem or failure occur, the product should not be used, but delivered as is to an authorized Shindaiwa servicing dealer.

It is a dealer’s and/or customer’s responsibility to complete and return the warranty registration card supplied with your Shindaiwa product or by visiting WWW.SHINDAIWA.COM. Your receipt of purchase including date, model and serial number must be main- tained and presented to an authorized Shindaiwa servicing dealer for warranty service. Proof of purchase rests solely with the cus- tomer. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so you may also have other specific legal rights which vary from state to state. This limited warranty is given by ECHO Incorporated, 400 Oakwood Rd., Lake Zurich, IL 60047.

DISCLAIMER OF IMPLIED WARRANTIES

This limited warranty is in lieu of all other expressed or implied warranties, including any warranty of FITNESS FOR A PARTICU- LAR PURPOSE OR USE and any implied warranty of MERCHANTABILITY otherwise applicable to this product. ECHO, INC. and its affi liated companies shall not be liable for any special incidental or consequential damage, including lost profi ts. There are no warranties extended other than as provided herein. This limited warranty may be modifi ed only by ECHO, INC.

99922201031

06/2010

23

Image 23
Contents X7501930200 07/10 EB344 BlowerIntroduction Table of ContentsUse Good Judgment General Safety InstructionsWork Safely Stay AlertBe Aware of the Working Environment Properly Equipped OperatorUnit Description ContentsEmission Control Exhaust & Evaporative SpecificationsAssembling the Blower Handling Fuel Mixing FuelAfter use Starting ProcedureFilling the Fuel Tank Starting the EngineStopping The Engine When The Engine StartsStarting a Flooded Engine Throttle Control Operating BlowerTwo-hand Operation MaintenanceMaintenance Procedure Notes Maintenance IntervalsAir Filter Fuel FilterCooling System Spark PlugBy a Shindaiwa-trained service technician Valve AdjustmentExhaust System Carburetor AdjustmentLong Term Storage Idle AdjustmentRemedy Troubleshooting GuideWhat To Check Possible CauseEngine is knocking Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Page Page Page Parts/Serial Number Servicing Information