Shindaiwa LE242/EVC, 81604 manual Assembly and Adjustments Install Gearcase Assembly

Page 6

Assembly and Adjustments

Install Gearcase Assembly

Figure 5

1.Loosen gearcase clamp screw.

2.Remove the gearcase index screw.

3.Slide the gearcase oriented as shown in Figure 5 onto the shaft tube insuring that the flex drive is engaged in the gearcase.

NOTE:

It may be necessary to pull the flex cable out from the shaft tube, engage into the gearcase and then slide the assembly onto the shaft tube.

4.Reinstall the index screw and tighten securely.

5.Tighten the clamp screw and torque to 52 – 69 inch pounds.

Assembly and Adjustments

Adjust Throttle Lever Free Play

The throttle lever free play should be ap- proximately 3/16-1/4 inch (4-6 mm). See Figure 6. Make sure that the throttle lever operates smoothly without binding.

If it becomes necessary to adjust the lever free play, follow the procedures and illustra- tions that follow.

 

 

 

 

 

 

251043

3/16-1/4 inch (4-6 mm)

 

 

 

Figure 6

 

Throttle Free Play

 

 

 

 

 

 

Figure 7

1.Loosen the air cleaner cover knob and remove the air cleaner cover.

See Figure 7.

2.Loosen the lock nut on the cable ad- juster. See Figure 8.

3.Turn the cable adjuster in or out as required to obtain proper free play 3/16-1/4 inch (4-6 mm). See Figure 8.

4.Tighten the locknut.

Cable

Lock

Adjuster

Nut

Figure 8

 

5. Reinstall the air cleaner cover.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents LE242/EVC Lawn Edger Safety Instructions ContentsIntroduction Safety Instructions Properly Equipped Operator Use Good JudgmentSafety Labels Be Aware of the Working EnvironmentSpecifications Prior to AssemblyProduct Description Adjust Throttle Lever Free Play Assembly and Adjustments Install Gearcase AssemblyAssembly and Adjustments Reinstall the air cleaner coverMixing Fuel Filling the Fuel TankExamples of 501 mixing quantities Slide the ignition switch to the on position. See Figure When the Engine StartsStarting the Engine Checking Unit Condition Idle Speed AdjustmentStopping the Engine Use only authorized Shindaiwa partsTo adjust blade height Using a Hand-held EdgerAdjusting the Cutting Depth Guidelines for Operating the EdgerGeneral Maintenance Daily MaintenanceHour Maintenance 10/15-Hour Maintenance Every 10 to 15 hours of operationLubricate the Flexible Shaft Inspect the Gearcase Protector With an authorized Shindaiwa servicingDealer Replacing the Edger Blade Long Term StorageTroubleshooting Guide Engine does not StartAdditional Problems Manufacturer’s Warranty Coverage Your Warranty Rights ObligationsOwners Warranty Responsibilities What is Covered by this WarrantyPage Japan 3167,-731 6696-692 Fax 2481-849-82-81 Fax2220-849-82-81 Teléfono Com.shindaiwa.www Hiroshima Ku,-Asaminami 3070-692 TeléfonoPropietario del Garantía de Responsabilidades Cubierto Está No QueConsiguientes Daños Garantía Esta Por Cubierto Está QueContinuación Diagnostico Guia Adicionales ProblemasDiagnostico Guia Potencia BajaPolvo de libre Plazo Largo de AlmacenamientoOrilladora la de Cuchilla la Reemplazar Bujía la ReínstaleMantenimiento horas 135 Cada Continuación Horas 50 Cada MantenimientoEngranajes de Caja la de Protector el Inspeccione Horas 50 Cada Mantenimiento Horas 10/15 Cada MantenimientoPrecaución Sujetadores Diario MantenimientoGeneral Mantenimiento BujíaCorte del Profundidad la Ajustando Mano de Orillador el UtilizandoShindaiwa marca de lador Oril para cuchillas sólo Utilice Motor del Parada Unidad la de Condición la VerifiqueMotor del Mínima Marcha de Ajuste ApagadoOperación de posición la Motor del Arranque…motor el arranca Cuando Desde motor el arranque NuncaCombustible de Tanque el Llenando De proporciónPRECAUCIÓN!¡ Combustible de Mezcla Acelerador del Holgura la Ajuste Ajustes y EnsamblajeEngranaje de Caja la de Instalación De normal operación la durante operador EspecificacionesEnsamblar de Antes Autorizadas no teraciones Al o modificaciones haga NoSeguridad de Etiquetas Trabajo de Area del Alerta EstéJuicio Buen Use ¡ADVERTENCIA Descalzo! máquina laDe Riesgo El Disminuya ContenidoIncendios Cuidado con Trabaje11/06 .Rev 81604 pieza de Número

81604, LE242/EVC specifications

The Shindaiwa LE242/EVC,81604 is a standout model in the realm of outdoor power equipment, particularly designed for professionals and homeowners seeking high-performance and reliability. This lightweight yet robust leaf blower offers an array of features and technologies that enhance its usability and efficiency, making it a preferred choice for various landscaping tasks.

One of the key characteristics of the Shindaiwa LE242/EVC is its powerful engine. The blower is equipped with a 24.5 cc two-stroke engine that delivers impressive air volume and speed while maintaining low emissions. This ensures that users can experience strong performance, whether clearing leaves from a driveway or tidying up a lawn after landscaping.

The ergonomics of the LE242/EVC are also noteworthy. With a lightweight design, it reduces user fatigue, allowing for longer operating times without discomfort. Additionally, the blower is designed with adjustable handles that provide optimal comfort and control, catering to a variety of users. The vibration-reducing features ensure a smoother experience, contributing to prolonged usage without straining the hands or arms.

Another significant feature of this model is its fuel efficiency. Shindaiwa incorporates advanced technologies to optimize fuel consumption, resulting in longer run times between refueling. This is especially advantageous for professionals who need to complete large tasks without frequent interruptions. The engine's low-noise characteristics are also beneficial for users operating in noise-sensitive environments.

For versatility, the LE242/EVC is compatible with a range of attachments, allowing users to customize their equipment for specific tasks. Whether it’s blowing debris, vacuuming leaves, or mulching, this blower adapts to different requirements, making it a multifaceted tool in any outdoor equipment arsenal.

Lastly, Shindaiwa’s reputation for durability is reflected in the construction of the LE242/EVC. Designed with high-quality materials, this leaf blower withstands the rigors of demanding use. Its reliability is a testament to the brand’s commitment to providing products that meet professional standards.

Overall, the Shindaiwa LE242/EVC,81604 combines power, efficiency, and user-friendly design, making it an ideal choice for anyone looking to maintain their property effectively and effortlessly. Whether for professional landscaping or home maintenance, it stands out as a top-tier solution for managing outdoor spaces.
Top Page Image Contents