Shindaiwa X7502825900 manual Mixing Fuel, Fuel Requirements

Page 10

Mixing Fuel

WARNING!

Alternative fuels, such as E15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa requirements are NOT approved for use in Shindaiwa gasoline engines. Use of alternative fuels may cause

performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) is NOT approved.

Hybrid 4TM Mixture Oil - Engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD standards must be used. Shindaiwa highly recommends using Shindaiwa Red ArmorTM engine oil in all Shindaiwa Hybrid 4TM engines to protect the engine from harmful carbon build up, maintain engine performance, and increase engine life. Shindaiwa Red ArmorTM engine oil exceeds ISO-L-EGD and J.A.S.O. M345/FD performance requirements. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD certified oil will void the engine warranty.

 

Examples of 50:1 mixing quantities

IMPORTANT!

Shindaiwa Red ArmorTM engine oil may be mixed at 50:1 ratio for application in all Shindaiwa engines sold in the past, regardless of ratio specified in those manuals.

IMPORTANT!

Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a fuel stabilizer is added. Use of unmixed, improp- erly mixed, or stale fuel, may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Long Term Storage section of this manual.

Handling Fuel

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result.

•Use an approved fuel container.

•DO NOT smoke near fuel.

•DO NOT allow flames or sparks near fuel.

•Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

•NEVER refuel a unit when the engine is HOT or RUNNING!

•DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.

•DO NOT overfill fuel tank. Wipe up spills immediately.

•Securely tighten fuel tank cap and close fuel container after refueling.

•Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.

•Move at least 3m (10 ft.) from refueling location before starting the engine.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents C254 Brushcutter Contents IntroductionWork Safely SafetySafety Labels Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentSpecifications Product DescriptionHandlebar Assembly Install the handlebar AssemblyPrior to Assembly Emission Control Exhaust & EvaporativeCutting attachment shield Install trimmer headNylon line replacement To advance trimmer line TipBlade Installation Install Metal ShieldInstall Blade Mixing Fuel Fuel RequirementsAfter use Filling the fuel tankMinimize the Risk of Fire Starting the Engine Press primer bulbChecking Unit Condition Stopping the EngineOperation Engine Operating Speeds Cutting grass with a trimmer headTrimmer head styles Trimming and Mowing GrassBrushcutter Handlebar Using a bladeBlade Thrust Brushcutter Shoulder StrapMaintenance Remove and clean or replace the spark plug Hour maintenance More frequently in dusty conditions10/15-Hour maintenance Hour maintenance Gearcase lubricationHour Maintenance Hour maintenance Remove and replace the fuel filter elementValve Adjustment Engine Break-In Carburetor AdjustmentMuffler and spark arrester maintenance High Altitude OperationBlade Sharpening Adjusting Engine IdleIdle Speed Adjustment Multiple-tooth Circular BladeLong Term Storage Troubleshooting Guide Possible CauseIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 99922201033 Page Page Page Page Servicing Information T10713001001/T10713999999

X7502825900 specifications

The Shindaiwa X7502825900 is a high-performance, cutting-edge machine that excels in both functionality and ease of use. Designed for professional landscapers and horticulturists, this powerful tool stands out for its robust construction and impressive capabilities, making it a reliable asset for any outdoor task.

One of the main features of the X7502825900 is its powerful engine. The equipment is equipped with a two-stroke engine that ensures enhanced efficiency and performance. This engine delivers an impressive power-to-weight ratio, enabling users to tackle heavy-duty tasks with ease while minimizing fatigue during extended use. Additionally, the advanced engine technology helps in reducing emissions, making it environmentally friendly.

The X7502825900 is designed with user comfort in mind. It features an ergonomic handle that provides a comfortable grip and reduces vibrations during operation. This ensures that users can work for longer periods without experiencing discomfort or strain. Furthermore, the machine incorporates a lightweight frame, which enhances maneuverability and allows for precise control in varied working conditions.

Another notable characteristic of the Shindaiwa X7502825900 is its cutting technology. The equipment is equipped with an ultra-efficient cutting head that facilitates clean and precise cuts every time. This feature is particularly beneficial for landscaping tasks, as it ensures a professional finish on hedges, shrubs, and other foliage. The easy-to-replace cutting accessories further enhance its versatility, making it adaptable to various trimming needs.

Additionally, the Shindaiwa X7502825900 incorporates innovative air filtration technology. This system helps to maximize the engine's lifespan by keeping harmful dust and debris at bay. By minimizing wear and tear, users can rely on the machine for prolonged periods, making it a cost-effective investment.

Overall, the Shindaiwa X7502825900 is a remarkable tool that combines power, efficiency, and user comfort. With its advanced technologies and thoughtful design features, this equipment meets the demanding needs of professionals in the landscaping industry. Whether tackling large properties or undertaking intricate gardens, the X7502825900 is engineered to deliver outstanding results, ensuring that users can achieve their landscaping goals with minimal effort.
Top Page Image Contents