Shindaiwa X7502831600 manual 01/2010

Page 27

ECHO INCORPORATED EMISSION CONTROL WARRANTY STATEMENT

FOR ECHO AND SHINDAIWA BRANDS

The Environmental Protection Agency (EPA) and the California Air Resources Board (C.A.R.B.) and ECHO Incorporated (ECHO Inc.) are pleased to explain the emission control system warranty on your 2010 and later equipment/small off-road engine (SORE). New equipment/SORE must be designed, built and equipped to meet stringent EPA and C.A.R.B. anti-smog standards. ECHO Inc. must warrant the emission control system on your equipment/SORE for the periods of time listed below, provided there has been no abuse, neglect or improper maintenance of your equipment/ SORE. Your emission control system may include parts such as: carburetor, fuel-injection system, ignition system, catalytic converter/muffl er, fuel tank, fuel feed lines, fuel cap assembly, spark plug, air fi lters, and other associated components. Where a warrantable condition exists, ECHO Inc will repair your equipment/SORE at no cost to you including diagnosis, parts and labor. The Emission Control System warranty is extended to the original owner including all subsequent owners.

MANUFACTURER'S WARRANTY COVERAGE:

The emission control system is warranted for 2 years or the length of the ECHO Inc. warranty, whichever is longer. If any emission-related part on your equipment is defective, the part will be repaired or replaced by ECHO Inc. or its Authorized Service Representative.

OWNER'S WARRANTY RESPONSIBILITIES:

As the equipment/SORE owner, you are responsible for the performance of the required maintenance listed in your Operator's Manual. ECHO Inc. recommends that you retain all receipts covering maintenance on your equipment/SORE however, ECHO Inc. cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. As the equipment/SORE owner, you should be aware that ECHO Inc. may deny you warranty coverage if your equipment/SORE or a part has failed due to abuse, neglect, improper maintenance or unapproved modifi cations.

You are responsible for presenting your equipment/SORE to an ECHO Inc. authorized service representative as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If a warrantable condition exists and there is no Authorized Dealer within 100 miles, ECHO Inc. will pay to ship the unit to the nearest authorized dealer. If you have questions regarding your warranty coverage, you should contact ECHO Inc. at 1-800-673-1558, web site WWW.ECHO-USA.COM or contact Shindaiwa at 1-877-986- 7783, web site WWW.SHINDAIWA.COM.

WHAT DOES THIS WARRANTY COVER?

ECHO Inc. warrants that your equipment/SORE was designed, built and equipped to conform with applicable EPA and C.A.R.B. emissions standards and that your equipment/SORE is free from defects in material and workmanship that would cause it to fail to conform with applicable requirements for 2 years or the length of the ECHO Inc. warranty, whichever is longer. The warranty period begins on the date the product is purchased by an end user.

HOW WILL A COVERED PART BE CORRECTED?

If there is a defect in a part covered by this warranty, any ECHO Inc. Authorized Service Dealer will correct the defect. You will not have to pay anything to have the part adjusted, repaired or replaced. This includes any labor and diagnosis for warranted repairs performed by the dealer. In addition, engine parts not expressly covered under this warranty but whose failure is a result of a failure of a covered part will be warranted.

WHAT PARTS ARE COVERED?

Any applicable emission related part not scheduled for "required maintenance" will be repaired or replaced within the warranty period. The repaired or replaced part will be warranted for the remaining ECHO Inc. warranty period.

Any warranted part that is scheduled only for regular inspection in the written instructions supplied is warranted for the warranty period stated above. Any such part repaired or replaced under warranty will be warranted for the remaining ECHO Inc. warranty period.

Any emission related part scheduled for replacement during "required maintenance" is warranted for the period of time prior to the fi rst scheduled replacement point for that part. Any such part repaired or replaced under warranty shall be warranted for the remainder of the period prior to the fi rst scheduled replacement point for that part.

Any manufacturer-approved replacement part may be used in the performance of any warranty maintenance or repairs on emission related parts, and must be provided without charge if the part is still under warranty.

Any replacement part that is equivalent in performance and durability may be used in non-warranty maintenance or repairs, and shall not reduce the warranty obligations of the manufacturer.

Throughout the equipment/SORE warranty period, ECHO Inc. will maintain a supply of warranted parts suffi cient to meet the expected demand for such parts.

SPECIFIC EMISSION RELATED WARRANTED PARTS:

 

• Electronic Ignition System

• Spark Plug

• Catalytic Converter / Muffl er Assembly

• Carburetor (complete assembly or replaceable components)

• Choke

• Fuel-Injection Assembly (or replaceable components)

• Fuel Tank

• Fuel Cap Assembly

• Air Filter

• Fuel Feed Line (and associated clamps/connectors as applicable)

WHAT IS NOT COVERED?

Any failure caused by abuse, neglect, improper maintenance, unapproved modifi cations, use of unapproved add-on parts/modifi ed parts or unapproved accessories.

This Emission Control Warranty is valid only for the U.S.A., it's Territories, and Canada.

99922201033

 

01/2010

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents C344 Brushcutter Introduction ContentsStay Alert SafetySafety Labels Work SafelyBe Aware of the Working Environment Properly Equipped OperatorProduct Description SpecificationsEmission Control Exhaust & Evaporative AssemblyPrior to Assembly Handlebar Assembly Install the handlebarInstall Cutting Attachment Shield Blade Installation Assembly Mixing Fuel Assembly Install BladeHandling Fuel Mixing InstructionsAfter use Filling the fuel tank Starting the EngineMinimize the Risk of Fire Starting a Flooded Engine When the Engine StartsStopping the Engine Checking Unit ConditionOperation Brushcutter Shoulder Strap Using a bladeBlade Thrust Brushcutter HandlebarMaintenance Hour maintenance Gearcase lubrication Hour maintenance More frequently in dusty conditionsHour maintenance Remove and replace the fuel filter element Hour MaintenanceValve Adjustment High Altitude Operation Carburetor AdjustmentMuffler and spark arrester maintenance Engine Break-InMultiple-tooth Circular Blade Adjusting Engine IdleIdle Speed Adjustment Blade SharpeningLong Term Storage Possible Cause Troubleshooting GuideIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Servicing Information T15111001001/T15111999999T15012001001/T15012999999

X7502831600 specifications

The Shindaiwa X7502831600 is a robust and innovative brush cutter renowned for its superior performance and advanced features that cater to both professional landscapers and gardening enthusiasts. This machine stands out in the competitive market of outdoor power equipment, integrating cutting-edge technology to deliver exceptional results in a variety of conditions.

One of the main features of the Shindaiwa X7502831600 is its powerful engine. Equipped with a high-performance, low-emission engine, this brush cutter ensures that you can tackle even the toughest vegetation without compromising on environmental standards. The engine is designed for durability and efficiency, allowing it to maintain optimal power while reducing fuel consumption.

Another significant characteristic is the ergonomic design of the X7502831600. Built with user comfort in mind, it features a lightweight construction that minimizes fatigue during prolonged use. The comfortable grips and well-balanced design enhance maneuverability, making it easier to navigate around trees, bushes, and other obstacles in your yard or garden.

The brush cutter incorporates advanced vibration-dampening technology, which significantly reduces operator fatigue and enhances overall control. This feature is particularly valuable for users who need to work for extended periods, as it helps ensure a more pleasant and productive experience.

The dual-string head of the Shindaiwa X7502831600 is designed to deliver efficient cutting performance, allowing for a wider cutting swath and reducing the number of passes needed to clear an area. This not only saves time but also enhances productivity, making it an excellent choice for commercial landscaping or large residential projects.

Additionally, the X7502831600 features easy-to-use controls and a quick-start mechanism, ensuring that users can start their work with minimal hassle. The inclusion of maintenance-friendly components simplifies routine upkeep, which is essential for prolonging the life of the equipment.

The Shindaiwa X7502831600 showcases a combination of reliability, power, and comfort, making it a top choice for those looking to maintain their landscapes with efficiency and ease. Whether you’re tackling thick brush or maintaining garden edges, this model is equipped to meet the demands of any outdoor project. With its innovative technology and user-friendly design, the X7502831600 truly sets a new standard in the world of brush cutters.
Top Page Image Contents