Shindaiwa 63888-94010 specifications P231 Pole Pruner

Page 1

Shindaiwa Inc.

P.O. Box 2810 Tualatin, Oregon 97062 Telephone: 503 692-3070

FAX: 503 692-6696 www.shindaiwa.com

Shindaiwa Kogyo Co., Ltd.

Head Office: 6-2-11 Ozuka

Nishi, Asaminami-ku

Hiroshima, 731-3167, Japan

Telephone: 81-82-849-2220

FAX: 81-82-849-2481

©2002 Shindaiwa, Inc.

Part Number 63888-94010

Printed in Japan

Rev. 2/02

Specifications subject to change without notice.

SHINDAIWA OWNER’S/

OPERATOR'S MANUAL

P231 POLE PRUNER

WARNING!

Minimize the risk of injury to yourself and others! Read this manual and familiarize yourself with the contents. Always wear eye and hearing protection when operating this unit.

Part Number 63888-94010

Rev. 2/02

Image 1
Contents P231 Pole Pruner Introduction ContentsYour Warranty Rights and Obligations Emission System Warranty Statement Safety PrecautionsManufacturer’s Warranty Coverage What is Covered by this WarrantyKickback and Pinching Safety Precautions Troubleshooting GuideOperating the Pruner LOW Power Output Safety Equipment and Labels Troubleshooting GuideUse Good Judgement Operating PrecautionsMinimize the Risk of Fire Filing Problems Operating Precautions Correct Filing TechniqueSharpening the Chain P231 SpecificationsSharpening Instructions Product Description Prior To AssemblyLong Term Storage Hour Maintnenace Connect the Outer Tube to the PowerheadRemove the Cylinder Cover Throttle Linkage and Ignition Leads Hour MaintenanceConnect the Throttle Cable Assemble and Adjust the Throttle Cable Hour Maintenance 10/15-Hour MaintenanceThrottle Linkage and Ignition Leads Every 10 to 15 hours of operationDisassembling The Pole Sections Assembling the Tube Sections Daily MaintenanceMuffler Spark PlugInstalling The Chain Check and Adjust Idle Speed Adjusting Oil Flow Rate When the Engine StartsStarting the Engine Chain Oiler Filling The Oil ReservoirStarting the Engine Mixing FuelFilling the Fuel Tank Minimize the risk of fire