Packing Instructions

In the event it is necessary to repack the equipment for	Quantity	Part Number	Description
shipment, the equipment must be packed exactly as shown	1	033888	Shipping carton only
below. It is very important that the four plastic feet are at-	4	033887	End cap (Foam pad)
tached to the bottom of the equipment. Two #10 x 2-1/4”
screws and washers must be used to fasten the unit securely	1	033697	Inside carton only
to the bottom pad and wood skid. This will ensure the	1	033725	Top Pad
proper equipment location on the bottom pad. Failure to do	1	034008	Bottom pad
this will result in shipping damage.	3	017218	Plastic foot (spacer)
Use the original shipping carton and interior parts only	1	033699	Wood skid
if they are all in good serviceable condition. If a shipping	2	101169	#10 x 2-¼” Wood screw
carton or any of the interior part(s) are needed, please call	2	104033	#10 x 1-¾” Flat washer
or write Customer Service Department of McIntosh Labo-
ratory. Please see the Part List for the correct part numbers.	4	017218	Plastic foot
	4	100159	#10-32 x ¾” Machine screw
	4	104083	#10 x 7/16” Flat washer