How to Connect Audio
Components
How to Connect Audio Components
1.Connect the MA6500 power cord to a live AC outlet.
2.Connect a cable from the TAPE 1 OUTPUTS to the Record Inputs of a tape recorder and the TAPE 1 IN- PUTS to a tape recorder Outputs. Connect a second tape in the same manner to the Tape 2 inputs and out- puts.
3.Connect a cable from a McIntosh D/A Converter UN- BALANCED outputs to the CD2 INPUTS.
4.Connect a cable from the McIntosh Transport Digital OPTICAL output to the McIntosh D/A Converter Digi- tal OPTICAL input.
5.Connect a cable from a McIntosh Tuner to the TUNER INPUTS.
6.Connect cables from a Turntable to the PH/AUX IN- PUTS and the Turntable Ground Connection to the GND grounding post.
7.Connect cable(s) from the POWER CONTROL jack to the Power Control In on a McIntosh component or Power Controller.
8.Connect a cable(s) from the DATA PORTS to the com- ponents that are to be controlled by the MA6500.
| McIntosh Tuner |
To AC Outlet |
|
McIntosh | Tape Recorder |
| |
| McIntosh D/A Converter |
| Turntable |
McIntosh CD Transport
8