Introduction, Performance Features | McIntosh MC1.2KW guide

Meter Illumination Control

Ground

Power

Control

PIN 1

PIN 2 PIN 3

Connector Information, Introduction and Performance Features

Connector and Cable Information

XLR Connectors

Below is the Pin configuration for the XLR Balanced Input Connectors on the MC1.2KW. Refer to the diagram for connection:

PIN 1: Shield/Ground

PIN 2: + Output

PIN 3: - Output

Power Control Connector

The MC1.2KW’s Power Control Inputs receive On/Off signals of +5 volts. An additional con- nection is for controlling the illumina- tion of the MC1.2KW Power Output Meters. The 1/8 inch stereo mini

phone plug connects to a McIntosh A/V Control Center Power Control

Output.

Note: The Power Control Connecting Cable is available from the McIntosh Parts Department:

Data and Power Control Cable Part No. 170-202

Six foot, shielded 2 conductor, with 1/8 inch stereo mini phone plugs on each end.

Introduction

• Power Guard

The patented McIntosh Power Guard circuit prevents the amplifier from being over driven into clipping, with its harsh distorted sound that can also damage your valuable loudspeakers.

• Sentry Monitor and Thermal Protection

McIntosh Sentry Monitor power output stage protection circuits ensure the MC1.2KW will have a long and trouble free operating life. Built-in Thermal Protection Circuits guard against overheating.

• Patented Autoformer

McIntosh designed and manufactured Output Autoformers provide an ideal match between the amplifier output stages and speaker loads of 2, 4 and 8 ohms. The Autoformers also provide perfect DC protection for your valuable loud- speakers.

• Special Power Supply

A regulated Power Supply, a very large Toroidal Wound Power Transformer and very large capacitors ensures sta- ble noise free operation even though the power line varies.

Now you can take advantage of traditional McIntosh standards of excellence in the MC1.2KW Power Ampli- fier. The 1,200 watt high current output will drive any high quality loudspeaker system to its ultimate performance. The MC1.2KW reproduction is sonically transparent and absolutely accurate. The McIntosh Sound is “The Sound of the Music Itself.”

Performance Features

• Power Output

The MC1.2KW is a Power Amplifier with a capability of 1,200 watts into 2, 4 or 8 ohm speakers with less than 0.005% distortion.

• Full Balanced Quad-Differential Circuitry

The MC1.2KW is fully balanced from inputs to outputs. It consists of two matched power amplifiers operating in push-pull with their outputs combined in a McIntosh Auto- former. The double balanced configuration cancels virtu- ally all distortion.

• Balanced and Unbalanced Inputs

Balanced connections guard against induced noise and al- low long cable runs without compromising sound quality.

• Illuminated Power Meter

The Illuminated Power Output Watt Meter on the MC1.2KW is peak responding, and indicates the true power output of the amplifier. The Peak Watt Hold Mode allows the meter to temporarily stay at the highest power output and then slowly decay. The Front Panel Meter Il- lumination may be switched Off at any time.

•Fiber Optic Solid State Front Panel Illumination The even Illumination of the Front Panel is accomplished by the combination of custom designed Fiber Optic Light Diffusers and extra long life Light Emitting Diodes (LEDs).

•Glass Front Panel and Super Mirror Chassis Finish The famous McIntosh Illuminated Glass Front Panel and the Stainless Steel Chassis with Super Mirror Finish en- sures the pristine beauty of the MC1.2KW will be retained for many years.

MC1.2KW specifications

The McIntosh MC1.2KW is a powerful monoblock amplifier designed for audiophiles who demand top-tier performance and precision. With a robust power output of 1,200 watts into an 8-ohm load and a staggering 2,400 watts into a 4-ohm load, this amplifier is engineered to drive even the most demanding loudspeakers with ease. The MC1.2KW exhibits impressive dynamic range, making it an ideal choice for reproducing both subtle nuances and explosive crescendos in music.

One of the standout features of the MC1.2KW is its use of McIntosh's advanced Autoformer technology. This transformer allows the amplifier to deliver full power regardless of the speaker impedance, which ensures that users can connect it to a wide range of speaker systems without sacrificing performance. This provides versatility and reliability, as it can effortlessly transition between different speaker loads.

Another key characteristic of the MC1.2KW is its unique Power Guard system. This technology continually monitors the audio signal and adjusts the output to protect both the amplifier and connected speakers from distortion and clipping. This protection processes help ensure that listeners enjoy an uncompromised audio experience, while also prolonging the lifespan of the equipment.

The MC1.2KW features a sleek and elegant design, complete with McIntosh's iconic glass front panel and illuminated logo. The distinctive blue watt meters not only add a touch of aesthetic appeal but also offer a visual representation of the amplifier's output, allowing users to monitor performance at a glance.

Additionally, the unit is equipped with a balanced input and a high-quality 12V trigger, allowing for seamless integration into any high-end audio system. The robust build quality, coupled with meticulous craftsmanship, ensures that the MC1.2KW can withstand the rigors of everyday use while delivering impeccable sound quality.

In conclusion, the McIntosh MC1.2KW monoblock amplifier merges cutting-edge technology with stunning design to provide audiophiles with an unparalleled listening experience. Its powerful output, versatility, and innovative features set it apart in the competitive world of high-fidelity audio. Whether for music enthusiasts or serious home theater setups, the MC1.2KW stands as a testament to McIntosh's dedication to superior sound reproduction.