Installation, 17-9/16 | McIntosh MC1.2KW instruction

MC1.2KW Bottom View in Custom Cabinet

21/32" 1.67cm

MC1.2KW Front Panel

Custom Cabinet Cutout

Cabinet

Front Panel

Opening for Ventilation

MC1.2KW Side View

in Custom Cabinet

Support Shelf

Installation

The MC1.2KW can be placed upright on a table or shelf, standing on its four feet. It also can be custom installed in a piece of furniture or cabinet of your choice. The four feet may be removed from the bottom of the MC1.2KW when it is custom installed as outlined below. The four feet together with the mounting screws should be retained for possible future use if

the MC1.2KW is removed

from the custom installa- tion and used free standing.

The required panel cutout, ventilation cutout and unit dimensions are shown.

Always provide ad- equate ventilation for your MC1.2KW. Cool operation ensures the longest pos- sible operating life for any electronic instrument. Do not install the MC1.2KW directly above a heat gen- erating component such as a high powered amplifier. If all the components are installed in a single cabinet, a quiet running ventilation fan can be a definite asset in maintaining all the system components at the coolest possible operating tempera- ture.

A custom cabinet instal- lation should provide the following minimum spacing dimensions for cool opera- tion.

Allow at least 6 inches (15.24cm) above the top, 2 inches (5.08cm) below the bottom and 1 inch (2.54cm) on each side of the Power

Amplifier, so that airflow is not obstructed. Allow 19- 1/2 inches (49.53cm) depth

behind the front panel. Al- low 1-5/8 inch (4.12cm) in front of the mounting panel1 for clearance. Be sure to cut

out a ventilation hole in the mounting shelf according to the dimensions in the drawing.

1When the MC1.2KW is installed together with other McIntosh Components, check clearances on all components before proceeding.

17-9/16"

44.62cm

10 -13/16"27.46cm

15.24cm Cutout Opening for Custom Mounting

Chassis

Spacers

Cutout Opening for Ventilation

1" 2.54cm

	14-1/2"


	36.83cm
			15-5/16"
		14"	15-5/16"
Cutout Opening		14"	38.91cm
		35.56cm	38.91cm
		35.56cm

for Ventilation

MC1.2KW specifications

The McIntosh MC1.2KW is a powerful monoblock amplifier designed for audiophiles who demand top-tier performance and precision. With a robust power output of 1,200 watts into an 8-ohm load and a staggering 2,400 watts into a 4-ohm load, this amplifier is engineered to drive even the most demanding loudspeakers with ease. The MC1.2KW exhibits impressive dynamic range, making it an ideal choice for reproducing both subtle nuances and explosive crescendos in music.

One of the standout features of the MC1.2KW is its use of McIntosh's advanced Autoformer technology. This transformer allows the amplifier to deliver full power regardless of the speaker impedance, which ensures that users can connect it to a wide range of speaker systems without sacrificing performance. This provides versatility and reliability, as it can effortlessly transition between different speaker loads.

Another key characteristic of the MC1.2KW is its unique Power Guard system. This technology continually monitors the audio signal and adjusts the output to protect both the amplifier and connected speakers from distortion and clipping. This protection processes help ensure that listeners enjoy an uncompromised audio experience, while also prolonging the lifespan of the equipment.

The MC1.2KW features a sleek and elegant design, complete with McIntosh's iconic glass front panel and illuminated logo. The distinctive blue watt meters not only add a touch of aesthetic appeal but also offer a visual representation of the amplifier's output, allowing users to monitor performance at a glance.

Additionally, the unit is equipped with a balanced input and a high-quality 12V trigger, allowing for seamless integration into any high-end audio system. The robust build quality, coupled with meticulous craftsmanship, ensures that the MC1.2KW can withstand the rigors of everyday use while delivering impeccable sound quality.

In conclusion, the McIntosh MC1.2KW monoblock amplifier merges cutting-edge technology with stunning design to provide audiophiles with an unparalleled listening experience. Its powerful output, versatility, and innovative features set it apart in the competitive world of high-fidelity audio. Whether for music enthusiasts or serious home theater setups, the MC1.2KW stands as a testament to McIntosh's dedication to superior sound reproduction.