Shark BG-3532, BG-2820, BG-2527, BG-3735, BG-3030 Unloader exploded view pARTS List, Description QTY

Unloader exploded view pARTS LIST

ITEM	PART NO.	DESCRIPTION	QTY
1	83-005150010	Check Connector	1
2	83-005060108	‡ O-Ring 2068	3
3	83-005100002	Shutter Spring	1
4	83-004120000	Shutter	1
5	83-004060109	‡ O-Ring 631290 SH	1
6	83-005170102	1/4 G Plug	1
7	83-005030101	M8 Lock Nut	1
8	83-005100100	Knob	1
9	83-005150101	Washer	1
10	83-005400403	4000 PSI Spring (Black)	1
11	83-005150011	Stem Guide Union	1
12	83-005000102	‡ Back Ring	
13	83-005060106	‡ O-Ring 2031	1
14	83-005160502	Stem AL606	1
	83-005160514	Stem AL607	1
15	83-005106301	Spring Pin	1
16	83-005000101	Back Ring	
17	83-005060101	‡ O-Ring 2050	1
18	83-005020003	Body By Pass 1/4 G-F	1
	83-005020026	Body By Pass 3/8 G-F	1
19	83-005060200	3/8 Gasket	1
20	83-001060129	‡ O-Ring 2043	1
21	83-001060200	‡ Seat	1
22	83-001160000	‡ Ball	1
23	83-005100003	Ball Spring	1
24	83-005150009	Seat Union	1
25	83-005030200	M8 Nut	
26	83-005170101	3/8G Plug	
27	83-005060201	Gasket	1
	83-005650200	‡ Repair Kit

ADJUSTING

Start with the valve set at its lowest spring tension. Raise pressure by turning adjusting knob clockwise until pressure is at the desired position. Do not over- tighten.

Open and close spray gun to be sure pressure is correct. Raise or lower pressure by adjusting the knob.

Do not by-pass more than 5 minutes when by-passing to the suction side of the pump.

97-707 • BG • REV. 7/06

PRESSURE WASHER Specifications

29