McIntosh owner manual How to Operate the MA6600, con’t

Page 18

How to Operate the MA6600, con’t

After approxi-

 

 

TONE CONTROL

mately 3 seconds

CD1

: BYPASS

the Information

 

 

Display returns

 

Figure 30

to indicate the

 

 

Source Selection and Volume Level.

TRIM LEVEL

The Trim Level adjustments allow for making fine adjust- ments to the previously performed Trim Level Adjustments (refer to the Setup Section of this Owner’s Manual on page 13). To make fine adjustment to the currently selected Input Source perform the following:

1. Rotate the TRIM SELECT Control or press the TRIM Push-button on the Remote Control until “TRIM LEVEL” appears on the Front Panel Information Dis-

play. Refer to

 

 

 

TRIM LEVEL: 0.0 dB

figure 31.

2. Rotate the

Min

Max

TRIM AD-

 

 

 

 

Figure 31

 

JUST Control

 

 

 

TRIM LEVEL: -6.0 dB

or press the

LEVEL + / -

Min

¦¦¦¦¦¦¦

Max

Push-buttons

 

 

 

 

Figure 32

 

to adjust the

 

 

 

volume level

TRIM LEVEL:

6.0 dB

from -6dB to

Min

¦¦¦¦¦¦¦ Max

(+) 6dB. Refer

 

 

 

 

Figure 33

 

to figures 32

 

 

 

 

 

and 33.

 

 

 

After approximately 3 seconds the Information Display returns to indicate the Source Selection and Volume Level.

METER ILLUMINATION

The MA6600 Front Panel Meter Illumination may be switched On or Off by performing the following:

1. Rotate the TRIM SELECT Control or press the TRIM Push-button on the Remote Control until “METER” appears on the Front Panel Information Display. Refer to figure 34.

2. Rotate the

 

 

METER

TRIM AD-

JUST Control

LIGHTS:

ON

or press the

 

 

Figure 34

 

LEVEL + /

 

 

- Push-but-

METER

 

tons to switch

LIGHTS:

OFF

On or Off the

 

 

Figure 35

 

Meter Illumi-

 

 

 

nation. Refer to figure 35.

After approximately 3 seconds the Information Display returns to indicate the Source Selection and Volume Level.

Note: For information on how the Front Panel Information Display Brightness can change with the Meter Illumi- nation setting, refer to page 15 “Display Brigthness”.

Mono

Press the Front Panel MONO Push-button or the MODE Push-button on the Remote Control to combine left and right stereo signals to a Monophonic signal. The LED

SOURCE: CD1 15%

Figure 17

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Integrated Amplifier Important Safety Instructions Thank You Table of ContentsCustomer Service Please Take a MomentIntroduction Dimensions Front View of the MA6600 Rear View of the MA6600Side View of the MA6600 Installation Rear Panel Connections Right OutputConnecting Components How to Connect Connecting Loudspeakers Loudspeaker Cable Distance vs Wire Gauge GuideRemote Control Push-Buttons How to use the Remote Control Trim Select Information Trim Adjust Front Panel Displays, Controls, Push-buttons and JackTrim Level Adjustment Setup How to Operate the Setup ModesDefault Settings Firmware VersionInput Source Settings Re-Title InputsMeter Illumination On/Off Accessory Power Control Setup, con’tPower Control Triggers Display BrightnessHow to Operate the MA6600 Source ServerBalance Source CD1How to Operate the MA6600, con’t Using a Separate Power Amplifier Headphones JackHow To Make a Recording HeadphoneUsing Output Reset of MicroprocessorsResetting the MA6600 to default settings How to Operate the MA6600, con’t Specifications Packing Instructions McIntosh Laboratory, Inc Chambers Street Binghamton, NY

MA6600 specifications

The McIntosh MA6600 is a renowned integrated amplifier that exemplifies the brand's commitment to audio excellence, bridging the gap between high-performance sound and elegant design. This amplifier is particularly celebrated for delivering a powerful and pristine audio experience, making it a popular choice among audiophiles and music enthusiasts alike.

At the heart of the MA6600 is its robust power output, boasting an impressive 200 watts per channel into 8 ohms. This ensures that the amplifier can easily drive a wide range of loudspeakers, from sensitive models to larger, more demanding systems. The dynamic power output of 300 watts into 4 ohms further enhances its versatility, allowing for a rich and powerful sound reproduction regardless of the speaker impedance.

One of the standout features of the MA6600 is its ability to effortlessly handle various audio sources. It comes equipped with multiple inputs, including five audio inputs (including phono), allowing users to connect a variety of analog and digital components. The built-in high-fidelity phono stage is particularly noteworthy, designed to accommodate both moving magnet and moving coil cartridges, ensuring vinyl aficionados can enjoy their collections to the fullest.

The MA6600 also showcases McIntosh’s signature Autoformers technology. This unique feature maintains optimal performance across different speaker loads, providing consistent and reliable sound quality. Furthermore, the amplifier utilizes McIntosh’s proprietary Power Guard technology, which ensures that the output signals are free from distortion and clipping, safeguarding speakers from damage during high-output scenarios.

With a sleek, modern design, the MA6600 features the iconic blue watt meters that McIntosh is famous for, adding a visual element that complements its high-performance capabilities. The all-aluminum chassis is not only aesthetically pleasing but also contributes to the unit's durability and resistance to interference.

In summary, the McIntosh MA6600 integrated amplifier is a masterpiece of audio engineering, boasting exceptional power, versatile connectivity, innovative technologies, and a timeless design. It stands as a testament to McIntosh's dedication to delivering an unparalleled listening experience, making it a highly sought-after component for any serious audio system. Whether for music lovers or serious collectors, the MA6600 offers a perfect blend of performance and style, setting a high standard in the world of high-fidelity audio equipment.
Top Page Image Contents