McIntosh Using Output, Reset of Microprocessors, Resetting the MA6600 to default settings

Page 20

 

How to Operate the MA6600, con’t

How to Operate the MA6600, con’t

 

Jumpers

Using Output 2

 

The MA6600 has provisions for connecting an external

 

Power Amplifier (to drive Loudspeakers in another room)

 

and an external sensor for remote operation of the MA6600

 

from that room. With an external Power Amplifier con-

 

nected (as illustrated on the McIntosh Connection Diagram

 

separate sheet “Mc1B”), press the Front Panel OUTPUT 2

Figure 40

Push-button or press on the Remote Control the 2nd Push-

button followed by pressing the OUTPUT 2 Push-button to

Note: The McIntosh Jumpers must be connected, between

switch On or Off the external Power Amplifier.

the above mentioned jacks, when the MA6600 Internal

 

Power Amplifier is to be used.

Reset of Microprocessors

The second way is to use both a separate power amplifier

In the unlikely event the controls of the MA6600 stop

and the MA6600 built-in Power Amplifier. Connect one

functioning, the microprocessors can be reset by perform-

pair of Loudspeakers to the separate power amplifier and

ing the following:

the second pair to the MA6600. Refer to the MA6600 Out-

1. Press the STANDBY/ON Push-button for approximate-

put Connection Diagrams located on the separate folded

ly five seconds.

sheet “Mc1B” and figure 41 below.

2. When the MA6600 cycles On then Off, release the

 

STANDBY/ON Push-button.

 

3. When the STANDBY/ON LED is illuminated press the

 

STANDBY/ON Push-button, the MA6600 will resume

 

normal operation.

 

Note: This can be performed with the MA6600 On or in

 

the Standby Mode.

Figure 41

Note: The MA6600 VOLUME Control will affect the sound level of all the Loudspeakers.

Resetting the MA6600 to default settings

If it becomes desirable to reset all the adjustable settings (Setup and Trim Settings) to the factory default values, perform the following:

SOURCE: CD1 15%

Figure 17

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Integrated Amplifier Important Safety Instructions Table of Contents Customer ServiceThank You Please Take a MomentIntroduction Side View of the MA6600 DimensionsFront View of the MA6600 Rear View of the MA6600 Installation Rear Panel Connections Right OutputConnecting Components How to Connect Connecting Loudspeakers Loudspeaker Cable Distance vs Wire Gauge GuideRemote Control Push-Buttons How to use the Remote Control Trim Select Information Trim Adjust Front Panel Displays, Controls, Push-buttons and JackSetup How to Operate the Setup Modes Default SettingsTrim Level Adjustment Firmware VersionMeter Illumination On/Off Input Source SettingsRe-Title Inputs Setup, con’t Power Control TriggersAccessory Power Control Display BrightnessHow to Operate the MA6600 Source ServerBalance Source CD1How to Operate the MA6600, con’t Headphones Jack How To Make a RecordingUsing a Separate Power Amplifier HeadphoneResetting the MA6600 to default settings Using OutputReset of Microprocessors How to Operate the MA6600, con’t Specifications Packing Instructions McIntosh Laboratory, Inc Chambers Street Binghamton, NY

MA6600 specifications

The McIntosh MA6600 is a renowned integrated amplifier that exemplifies the brand's commitment to audio excellence, bridging the gap between high-performance sound and elegant design. This amplifier is particularly celebrated for delivering a powerful and pristine audio experience, making it a popular choice among audiophiles and music enthusiasts alike.

At the heart of the MA6600 is its robust power output, boasting an impressive 200 watts per channel into 8 ohms. This ensures that the amplifier can easily drive a wide range of loudspeakers, from sensitive models to larger, more demanding systems. The dynamic power output of 300 watts into 4 ohms further enhances its versatility, allowing for a rich and powerful sound reproduction regardless of the speaker impedance.

One of the standout features of the MA6600 is its ability to effortlessly handle various audio sources. It comes equipped with multiple inputs, including five audio inputs (including phono), allowing users to connect a variety of analog and digital components. The built-in high-fidelity phono stage is particularly noteworthy, designed to accommodate both moving magnet and moving coil cartridges, ensuring vinyl aficionados can enjoy their collections to the fullest.

The MA6600 also showcases McIntosh’s signature Autoformers technology. This unique feature maintains optimal performance across different speaker loads, providing consistent and reliable sound quality. Furthermore, the amplifier utilizes McIntosh’s proprietary Power Guard technology, which ensures that the output signals are free from distortion and clipping, safeguarding speakers from damage during high-output scenarios.

With a sleek, modern design, the MA6600 features the iconic blue watt meters that McIntosh is famous for, adding a visual element that complements its high-performance capabilities. The all-aluminum chassis is not only aesthetically pleasing but also contributes to the unit's durability and resistance to interference.

In summary, the McIntosh MA6600 integrated amplifier is a masterpiece of audio engineering, boasting exceptional power, versatile connectivity, innovative technologies, and a timeless design. It stands as a testament to McIntosh's dedication to delivering an unparalleled listening experience, making it a highly sought-after component for any serious audio system. Whether for music lovers or serious collectors, the MA6600 offers a perfect blend of performance and style, setting a high standard in the world of high-fidelity audio equipment.
Top Page Image Contents