Vanson V-6000 manual Quick view, InitializationRESET ALL

Quick view

If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is possible only with still images.

Setting Quick View
1. In any mode with the exception of Voice Recording mode,
press the MENU button.	NOR		2816
2. Press the LEFT/ RIGHT button and select the [SETUP]
			SETUP
menu tab.
		LCD
3. Select the [Q.VIEW] menu by pressing the UP/ DOWN
		VIDEO		1 SEC
button and press the RIGHT button.		Q. VIEW

4. Select a desired sub menu by pressing the UP/ DOWN	BACK:	SET:OK
button and press the OK button.

[OFF]	: The quick view function can’t be activated.
[1 ~ 3 SEC]	: The captured image is briefly displayed during the selected time.

5. Press the menu button twice and the menu will disappear.

Initialization(RESET ALL)

All camera menu and function settings will be restored to their default values. However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be changed.

Initializing the Camera
1. In any mode with the exception of Voice Recording mode,
press the MENU button.	NOR		2816
2. Press the LEFT/ RIGHT button and select the [SETUP]
			SETUP
menu tab.		VIDEO
3. Select the [RESET] menu by pressing the UP/ DOWN		Q. VIEW		NO
				YES
button and press the RIGHT button.		RESET
		BACK:		SET:OK

4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.

If [NO] is selected	: Settings will not be restored to their defaults.
If [YES] is selected	: All settings will be restored to their defaults.

5. Press the menu button twice and the menu will disappear.

85