Vanson V-6000 manual Polarity+, Arrow, Insert the batteries taking note of the polarity +

Connecting to a Power Source

DANGER

Always turn off the power before taking the AC adapter out of the mains supply.

As with all mains powered devices, safety is important. Ensure that neither the camera nor adapter comes into contact with water or metallic materials.

Please ensure that you use an AC adapter (5V 2.0A) with the correct specification for the camera. Failure to do so may affect your warranty.

Using the batteries	: If the camera does not turn on after you have inserted batteries,
	please check whether the batteries are inserted with the correct
	polarity(+/-).
	1. Open the battery chamber cover by pushing in the direction of the
	arrow.

2. Insert the batteries taking note of the polarity (+ / -).

[ Inserting the AA type battery ] [ Inserting the CR-V3 type battery ]

3. To close the battery chamber cover, push it until it clicks.

There are 3 indicators for battery condition that are displayed on the LCD monitor.

Battery indicator
Battery status	The batteries are fully	Prepare new batteries.	There is no battery capacity.
	charged.		Replace with new batteries.

16