Vanson V-6000 manual Metering, Continuous shot, Single

Metering

If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures.

MULTI(		)	: Exposure will be calculated based on an
			average of the available light in the image	2816		NOR
			area. However, the calculation will be
					METERING
			biased towards the centre of the image
			area. This is suitable for general use.		MULTI
SPOT(	)		: Only the rectangular area in the center		SPOT
			of the LCD monitor will be metered for
			light. This is suitable when the subject
			in the center is exposed correctly, regardless of the back lighting.

INFORMATION

The default metering mode is Multi pattern metering.

If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, rather use exposure compensation.

Continuous shot

Select the number of pictures in continuous shooting.

- [SINGLE]	: Take one picture only
- [2, 4, 8 SHOTS]	: Take the set number of pictures with one
	push of the shutter. Continuous shooting
	mode is cleared after one shooting.

NOR

SHOOTING

SINGLE

2 SHOTS

4 SHOTS

8 SHOTS

[ PROGRAM mode ]

50