Vanson V-6000 manual PictBridge, Images, Printer Setup, Dpof Auto Print

PictBridge

You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. TIFF, Movie clips and voice files cannot be printed. You can set up the following settings from the PictBridge menu.

	IMAGES	: Select the pictures to be printed.
	PRINTER SETUP	: Setting up printing(AUTO SET/CUSTOM SET)
	PRINT	: Printing pictures
	DPOF AUTO PRINT	: Printing the DPOF files
	RESET	: Initializing the PictBridge functions
Connecting the Camera to a Printer
1. Slide the power switch to turn the camera power on.
2. In a mode other than Voice Recording mode, press the			NOR	2816
	MENU button.
				SETUP
3. Press the LEFT/ RIGHT button and select [SETUP]
			Q. VIEW
	menu tab.
			RESET	COMPUTER
4. Select [USB] menu by pressing the UP/ DOWN button			USB	PRINTER
	and press the RIGHT button.		BACK:	SET:OK

5.Select [PRINTER] menu by pressing the UP/ DOWN button and press the OK button.

6.Press the menu button twice and the menu will disappear.

7.Use the supplied USB cable to connect the camera to the printer as shown below.

8.Turn on the printer to connect the camera to the printer.

If you selected [COMPUTER] in Step 5, when you connect the camera to your printer, the Mode dial lamp(Green) will illuminate and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 2 and onward.

73