Manuals / Pelco / Household Appliance / Home Security System

Pelco Dx8000 manual Introduction, Parts List, Tools Needed, Qty Description

Models: Dx8000

1 40

Download 40 pages 3.7 Kb

Page 3

Introduction

Introduction

The following instructions serve as a guide for replacing the primary hard disk drive of your DX8000 Series digital video recorder (DVR). Step-by-step directions show you how to install the DX8000-UP250 hard disk upgrade kit.

PARTS LIST

NOTE: This upgrade kit includes a Pelco-certified hard disk drive. Using any other hard disk drive with the DX8000 voids the manufacturer’s warranty for the DX8000.

Qty Description

1250 GB hard disk drive

2Mounting screws

1 DX8000 Reinstallation CD

TOOLS NEEDED

1Phillips-head screwdriver #1 (nonmagnetic)

1Properly grounded ESD wrist strap and mat

4Small containers for storing screws (optional)

C1606M (6/04)

1

Image 3

Pelco Dx8000 manual Introduction, Parts List, Tools Needed, Qty Description

Contents

Digital Video Recorder DX8000DX8000 Hard Drive Upgrade Installation For Single Drive SystemsPage Qty Description PARTS LISTIntroduction TOOLS NEEDEDGetting Ready C1606M 6/04 Figure 2. Removing Power Cord from UnitFigure 3. ESD Protection OPEN THE UNIT CHASSIS Prepare Unit for Drive InstallationFigure 4. Removing Chassis Cover COMPONENT LAYOUT Move the Front Cross-Brace C1606M 6/04 1a 1a Disconnect the Data and Power CablesC1606M 6/04 2.Remove the power connectors from the hard driveFigure 9. Removing Hard Drive Power Connection HARD DRIVE POWER CONNECTORRemove the Drive Mount Basket REMOVE THE ORIGINAL DRIVE Replace the Primary Hard DiskC1606M 6/04 MOUNT THE NEW DRIVE2.Mount the drive basket back into the chassis Figure 13. Replacing Drive BasketC1606M 6/04 SET THE MASTER / SLAVE JUMPER FRONT OF DVR Figure 15. Setting Drive JumperC1606M 6/04 RECONNECT THE DATA AND POWER CABLESC1606M 6/04 1b 1a 1cC1606M 6/04 Figure 17. Installing Power ConnectorFigure 18. Replacing Front Cross-Brace Reassemble the UnitC1606M 6/04 Figure 19. Replacing Chassis CoverFigure 20. Restarting Unit CONFIGURE SYSTEM TO BOOT FROM CD/DVD Install Software on the New DriveAwardBIOS Setup Utility Advanced Power Boot ExitMain Main AwardBIOS Setup UtilityPower Boot8.Finalize BIOS changes INSTALL SOFTWARE 1.The DX8000 Recovery dialog box appearsFigure 23. DX8000 Recovery Dialog Box Figure 24. Partition Size Verification Dialog Box stored on your system’s C driveC1606M 6/04 Figure 25. Proceed with Disk Restore Dialog Box Main AwardBIOS Setup UtilityAdvanced Power Boot Exit Figure 27. DX8000 BIOS Setup Main ScreenMain AwardBIOS Setup UtilityPower BootInitialize the New Drive Figure 31. Selecting Allocation Option Figure 30. Opening Drive Option MenuPage Figure 34. PDB Database Creation Progress Bar PRODUCT WARRANTY AND RETURN INFORMATION WARRANTYRETURNS Tel 1-559/292-1981 Fax 1-559/348-1120 Worldwide Headquarters 3500 Pelco WayClovis, California 93612 USA USA & Canada Tel 800/289-9100 Fax 800/289-9150 International