Manuals / Pelco / Household Appliance / Home Security System

Pelco Dx8000 manual Disconnect the Data and Power Cables, 1a 1a

Models: Dx8000

1 40

Download 40 pages 3.7 Kb

Page 12

Disconnect the Data and Power Cables

Disconnect the Data and Power Cables

When removing the data and power cables, pull the connectors straight out. Do not rock connectors back and forth or remove a cable by pulling it by its wires or cable.

1.Remove the IDE data cable from the existing hard drive, CD-RW drive, and motherboard:

a.Carefully pull the plastic tab of each cable connector away from the hard drive and CD-RW drive. Refer to Figure 8.

b.Following the same procedure, remove the other end of the IDE cable from the drive interface connector on the motherboard. Refer to Figure 8.

HARD DRIVE IDE CONNECTOR

CD-RW IDE CONNECTOR

1a

1a

MOTHERBOARD

IDE CONNECTOR 1b

Figure 8. Removing the IDE Data Cable

10	C1606M (6/04)

Image 12

Pelco Dx8000 manual Disconnect the Data and Power Cables, 1a 1a

Contents

DX8000 DX8000 Hard Drive Upgrade InstallationFor Single Drive Systems Digital Video RecorderPage PARTS LIST IntroductionTOOLS NEEDED Qty DescriptionGetting Ready Figure 2. Removing Power Cord from Unit C1606M 6/04Figure 3. ESD Protection Prepare Unit for Drive Installation OPEN THE UNIT CHASSISFigure 4. Removing Chassis Cover COMPONENT LAYOUT Move the Front Cross-Brace C1606M 6/04 Disconnect the Data and Power Cables 1a 1a2.Remove the power connectors from the hard drive Figure 9. Removing Hard Drive Power ConnectionHARD DRIVE POWER CONNECTOR C1606M 6/04Remove the Drive Mount Basket Replace the Primary Hard Disk REMOVE THE ORIGINAL DRIVEMOUNT THE NEW DRIVE C1606M 6/042.Mount the drive basket back into the chassis Figure 13. Replacing Drive BasketC1606M 6/04 SET THE MASTER / SLAVE JUMPER Figure 15. Setting Drive Jumper FRONT OF DVRRECONNECT THE DATA AND POWER CABLES C1606M 6/041b 1a 1c C1606M 6/04Figure 17. Installing Power Connector C1606M 6/04Reassemble the Unit Figure 18. Replacing Front Cross-BraceFigure 19. Replacing Chassis Cover C1606M 6/04Figure 20. Restarting Unit Install Software on the New Drive CONFIGURE SYSTEM TO BOOT FROM CD/DVDAwardBIOS Setup Utility Advanced Power Boot ExitMain AwardBIOS Setup Utility PowerBoot Main8.Finalize BIOS changes INSTALL SOFTWARE 1.The DX8000 Recovery dialog box appearsFigure 23. DX8000 Recovery Dialog Box Figure 24. Partition Size Verification Dialog Box stored on your system’s C driveC1606M 6/04 Figure 25. Proceed with Disk Restore Dialog Box AwardBIOS Setup Utility Advanced Power Boot ExitFigure 27. DX8000 BIOS Setup Main Screen MainAwardBIOS Setup Utility PowerBoot MainInitialize the New Drive Figure 30. Opening Drive Option Menu Figure 31. Selecting Allocation OptionPage Figure 34. PDB Database Creation Progress Bar PRODUCT WARRANTY AND RETURN INFORMATION WARRANTYRETURNS Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & CanadaTel 800/289-9100 Fax 800/289-9150 International Tel 1-559/292-1981 Fax 1-559/348-1120