Manuals / Pelco / Household Appliance / Home Security System

Pelco Dx8000 manual Install Software on the New Drive, Configure System To Boot From Cd/Dvd

Models: Dx8000

1 40

Download 40 pages 3.7 Kb

Page 26

Install Software on the New Drive

To complete the installation of a new primary hard disk in your DX8000, all necessary operating system and application software must be installed. Installation of this software will require that you configure the DX8000 to boot from the CD/DVD drive. Then follow the on-screen directions to prepare the new hard disk drive for service in your DVR.

CONFIGURE SYSTEM TO BOOT FROM CD/DVD

To change the boot drive from the hard disk to the CD/DVD drive:

1.Insert the DX8000 Reinstallation CD into your DVR’s CD/DVD drive.

2.Boot the DX8000 Series DVR by turning on the power switch, or restart the system if it is already running. Refer to the Operations and Programming Manual for instructions on restarting the DX8000.

24	C1606M (6/04)

Image 26

Pelco Dx8000 manual Install Software on the New Drive, Configure System To Boot From Cd/Dvd

Contents

For Single Drive Systems DX8000DX8000 Hard Drive Upgrade Installation Digital Video RecorderPage TOOLS NEEDED PARTS LISTIntroduction Qty DescriptionGetting Ready Figure 2. Removing Power Cord from Unit C1606M 6/04Figure 3. ESD Protection Prepare Unit for Drive Installation OPEN THE UNIT CHASSISFigure 4. Removing Chassis Cover COMPONENT LAYOUT Move the Front Cross-Brace C1606M 6/04 Disconnect the Data and Power Cables 1a 1aHARD DRIVE POWER CONNECTOR 2.Remove the power connectors from the hard driveFigure 9. Removing Hard Drive Power Connection C1606M 6/04Remove the Drive Mount Basket Replace the Primary Hard Disk REMOVE THE ORIGINAL DRIVEMOUNT THE NEW DRIVE C1606M 6/04C1606M 6/04 2.Mount the drive basket back into the chassisFigure 13. Replacing Drive Basket SET THE MASTER / SLAVE JUMPER Figure 15. Setting Drive Jumper FRONT OF DVRRECONNECT THE DATA AND POWER CABLES C1606M 6/041b 1a 1c C1606M 6/04Figure 17. Installing Power Connector C1606M 6/04Reassemble the Unit Figure 18. Replacing Front Cross-BraceFigure 19. Replacing Chassis Cover C1606M 6/04Figure 20. Restarting Unit Install Software on the New Drive CONFIGURE SYSTEM TO BOOT FROM CD/DVDMain AwardBIOS Setup UtilityAdvanced Power Boot Exit Boot AwardBIOS Setup UtilityPower Main8.Finalize BIOS changes Figure 23. DX8000 Recovery Dialog Box INSTALL SOFTWARE1.The DX8000 Recovery dialog box appears C1606M 6/04 Figure 24. Partition Size Verification Dialog Boxstored on your system’s C drive Figure 25. Proceed with Disk Restore Dialog Box Figure 27. DX8000 BIOS Setup Main Screen AwardBIOS Setup UtilityAdvanced Power Boot Exit MainBoot AwardBIOS Setup UtilityPower MainInitialize the New Drive Figure 30. Opening Drive Option Menu Figure 31. Selecting Allocation OptionPage Figure 34. PDB Database Creation Progress Bar RETURNS PRODUCT WARRANTY AND RETURN INFORMATIONWARRANTY Tel 800/289-9100 Fax 800/289-9150 International Worldwide Headquarters 3500 Pelco WayClovis, California 93612 USA USA & Canada Tel 1-559/292-1981 Fax 1-559/348-1120