Pelco Dx8000 manual AwardBIOS Setup Utility, Main, Advanced, Power, Boot, Exit, Apapi Cd-Rom

10.Press the minus (-) key on your keyboard to change the boot sequence from the CD/DVD drive back to the hard disk. The screen should look something like the example in Figure 28.

			10
		AwardBIOS Setup Utility
Main		Advanced		Power	Boot		Exit
							Item Specific Help
1.	IDE Hard Drive		[Maxtor 7Y250P0]
2.	APAPI CD-ROM		[	TEAC CD-W552E		]
3.	Other Boot Device		[INT18 Device (Networ]				Boot Sequence:
4.	Removable Device		[Disabled]
							<Enter> To select
							the device.
Plug & Play O/S			[No]
Reset Configuration data			[No]				To select the boot
Boot Virus Detection			[Disabled]				sequence, use the up or
Quick Power On Self Test			[Enabled]				down arrow. Press <+>
Boot Up Floppy Seek			[Disabled]				to move the device up
Full Screen Logo			[Enabled]				the list, or <-> to
Interrupt Mode			[APIC]				move it down the list.

F1 Help Select Item -/+Change Values F5 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Save and Exit

Figure 28. BIOS Boot Screen with Hard Disk Drive at Top

11.Press the F10 function key on your keyboard to save and exit the BIOS setup screen.

12.Press the Enter key to accept the change and reboot your DVR.

32 C1606M (6/04)