McIntosh XRT29 owner manual Thank You, Please Take a Moment, Customer Service, Table of Contents

Models: XRT29

1 16
Download 16 pages 14.45 Kb
Page 3
Image 3

Thank You

Your decision to own this McIntosh XRT29 Loudspeaker System ranks you at the very top among discriminating music listeners. You now have “The Best.” The McIntosh dedication to “Quality,” is assurance that you will receive many years of musical enjoyment from this unit.

Please take a short time to read the information in this manual. We want you to be as familiar as possible with all the features and functions of your new McIntosh.

Please Take A Moment

The serial number, purchase date and McIntosh Dealer name are important to you for possible insurance claim or future service. The spaces below have been provided for you to record that information:

Serial Number:

Purchase Date:

Dealer Name:

Technical Assistance

If at any time you have questions about your McIntosh product, contact your McIntosh Dealer who is familiar with your McIntosh equipment and any other brands that may be part of your system. If you or your Dealer wish ad- ditional help concerning a suspected problem, you can re- ceive technical assistance for all McIntosh products at:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Phone: 607-723-1545

Fax: 607-723-3636

Customer Service

If it is determined that your McIntosh product is in need of repair, you can return it to your Dealer. You can also return it to the McIntosh Laboratory Service Department. For as- sistance on factory repair return procedure, contact the McIntosh Service Department at:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Phone: 607-723-3515

Fax: 607-723-1917

Copyright 2003  by McIntosh Laboratory, Inc.

Table of Contents

 

Safety Instructions

2

Thank You and Please Take a Moment

3

Technical Assistance and Customer Service

3

Table of Contents and Important Information

3

Introduction

4

Performance Features

5

Dimensions

6

Installation

8

How to Connect using a single amplifier

10

How to Connect using two amplifiers

12

Specifications

14

Packing Instruction

15

Important Information

Caution: The XRT29 High Frequency Column weight is 82 pounds (37.20kg) net. It requires two or more persons to safely handle the column.

1.Loudspeaker Cables of adequate size are important to ensure that there will be no significant power loss or heating. Cable size is specified in Gauge numbers or AWG (American Wire Gauge). The smaller the Gauge number, the larger the wire size:

If the Loudspeaker Cables are 25 feet (7.62m) or less, use at least 18 Gauge (AWG) wire size or larger.

If the Loudspeaker Cables are 50 feet (38.1m) or less, use at least 14 Gauge (AWG) wire size or larger.

If the Loudspeaker Cables are 100 feet (76.2m) or less, use at least 12 Gauge (AWG) wire size or larger.

The Loudspeaker Connection Terminals can accept up to 12 Gauge (AWG) wire.

2.For additional connection information, refer to the owner’s manual(s) for any component(s) connected to the XRT29 Loudspeaker.

3.The XRT29 has built-in speaker protection in the form of three automatic resetting solid-state devices as part of the crossover networks. Two protect the tweeters and one for the midranges drivers. The characteristics of this protection are that a certain amount of overdrive is allowed but extended periods of overdrive will trigger protection. If an obvious lack of high or mid frequencies is noticed, the Loudspeaker Protection Device may have activated. The protection devices will automatically reset when the volume control is reduced significantly and kept low until the output of the affected Loudspeaker Element returns to normal.

4.When the XRT29 Loudspeaker System is driven by more than one amplifier, the output levels of the different amplifiers connected to the Loudspeaker System must be adjusted to achieve a proper balance between the midrange and high frequencies reproduced. This adjustment is best achieved through the use of audio test equipment operated by a qualified installer.

5.The XRT29 is designed to be used with a Subwoofer, like a McIntosh PS112, in order to hear the entire audible range of sound.

3

Page 3
Image 3
McIntosh XRT29 owner manual Thank You, Please Take a Moment, Customer Service, Table of Contents, Important Information

XRT29 specifications

The McIntosh XRT29 is a flagship speaker model that epitomizes audiophile-level performance and craftsmanship. As part of McIntosh's renowned line of high-fidelity audio equipment, the XRT29 aims to deliver an unparalleled listening experience through its innovative design and advanced technologies.

One of the main features of the McIntosh XRT29 is its unique driver configuration. The speaker utilizes a combination of 65 individual drivers, including multiple woofers, midrange speakers, and tweeters. This extensive array facilitates a wide frequency range, ensuring that both low bass notes and high-frequency details are reproduced with stunning clarity. The woofers feature high-power handling capabilities, allowing them to produce deep and impactful bass that fills the room, while the meticulously engineered tweeters deliver crisp and clear high frequencies.

The XRT29 showcases McIntosh's proprietary technologies, including the company's advanced waveguide design. This innovation aids in optimizing sound dispersion, allowing listeners to enjoy a consistent audio experience across a wide listening area. By minimizing distortion and phase issues, the waveguide enhances coherence and accuracy, making it ideal for both stereo and multi-channel setups.

Additionally, the XRT29 incorporates McIntosh's acclaimed Autoformer technology. This ensures that the speaker performs optimally across various impedance levels, making it compatible with a wide range of amplifiers. As a result, it provides remarkable power handling and consistent playback quality, regardless of the audio source.

The aesthetic appeal of the XRT29 is equally impressive. With its striking cabinet design that includes premium materials and a stunning finish, these speakers are sure to captivate not just audiophiles but also interior design enthusiasts. The baffle is crafted from furniture-grade wood, and the speaker features elegant accents that highlight its sophisticated look.

In summary, the McIntosh XRT29 represents a pinnacle of audio engineering, combining an extensive driver array, advanced sound dispersion technologies, and an aesthetically pleasing design. For those who demand the best in sound quality, the XRT29 is a worthy addition to any high-end audio system. It stands as a testament to McIntosh's commitment to excellence, making it a top choice for discerning listeners seeking the ultimate audio experience.