Installation
Room Placement
ing the supplied Mounting Screws.
14. Referring to figure 12, measure down from the just mounted L Bracket and install the Bot-
tom L Bracket to- Opening for Figure 11 Locking Screw
gether with the
Shim Plate, using the supplied Mounting Screws.
15.With two persons, orient the Column End with the Top L Bracket above the Mounting Sleeve and carefully line up the
bracket with the sleeve. Lower the Column onto
the Nylon
Pivot Point on the Bot- tom L Bracket while at the same
time the Top L Bracket is
inserted into the Mounting
Sleeve.
16. Install the Locking Screw to-
gether with
the Flat Washer into the opening on the Top L Bracket to secure the Column.
17. Orient the Loudspeaker Grille with
the extended wood trim
pointed to-
wards the Column Base and line it up even with top/ sides of the Column. Align the Grille fastening pins to the Column Grommets (there are six pins on each side). Carefully push down to secure the Grille to the Column.
Loudspeaker placement in a room can greatly affect performance. The XRT29 Loudspeaker is designed for both Music and Home Theater Systems. The optimal method for selecting speaker locations includes the use of a real time spectrum analyzer operated by an experienced system installer. An uncompromising installation would take into consideration the floor, wall and ceiling coverings, the type and placement of furniture and can even include the architectural design of the room and its construction materials. In those instances where placement in the room is fixed, an environmental equalizer may be needed to restore proper musical balance. Experiment with various Loudspeaker positions to determine the best sounding location.
Locating Loudspeakers for use in Home Theater
In a Home Theater application, the placement of Left and Right Front Loudspeakers can be limited by such considerations 
as the size and location of the
video monitor. The locating suggestions in
the “for use in a Music System” section below
can still be helpful as a starting place. Refer to figure 13.
Locating Loudspeakers for use in a Music System When used in a Music System the distance between the Loudspeakers and the listener to the Loudspeakers should form an 
isosceles triangle. If the speakers are too far apart relative
to the listener, some imaging
can be lost. Refer to figure 14.
Figure 14
9
