D-Link DFE-570TX manual Software Installation, Driver Installation

Software Installation

Microsoft Windows NT 4.0 (with Service Pack 3 and NDIS Hot Fix), or later is needed before network drivers are installed.

Note: Please make sure you have installed SNMP service

before you installed Service Pack 3 and NDIS Hot Fix .

Driver Installation

After properly installing the adapter into the server, the next step is to install the driver software.

1)Start the server with Windows NT 4.0 and insert the software diskette into drive A.

2)Open the icons, My Computer → Control Panel → Networks.

3)Select Add Adapter → Have Disk. Choose “ D-LinkDFE-570TX PCI Fast Ethernet Server Adapter” .

4)After driver files are copied to the server, a configuration window will appear. From here, you can assign the Connection Type and Network Address for adapter. It is suggested that you choose the default values for both of these.

5)Restart the computer.

￿D-Link Network Adapter Load Balancing and

Failover Installation

Please reference the “SetupGuide.pdf “.

9