| |
Type I, Style A | Installation |
Installing Standard
(contd.)
3.Connect the end of the coaxial cable terminated with antenna connector to the antenna hub.
NOTE: To prolong the life of the antenna in or around coastal areas, it is recommended that the hardware be encapsulated with a silicon rubber compound such as
Installing Antenna
This subsection describes how to install the antenna.
Safety Precautions
WARNING: Installation of the antenna near power lines is dangerous. For your safety, follow the installation directions.
Each year, hundreds of people are killed, mutilated, or receive severe permanent injuries when attempting to install an antenna. In many of these cases, the victim was aware of the danger of electrocution but did not take adequate settings to avoid the hazard. For your safety, and to achieve a good installation, please read and follow the safety precautions below. They may save your life.
Follow the safety guidelines below.
•Select your installation site with safety, as well as performance, in mind.
•Plan your installation procedure carefully and completely before you begin.
•Successful raising of a mast or tower is largely a matter of coordination.
•Each person should be assigned to a specific task and should know what to do and when to do it. One person should be designated as the master of the operation to call out instructions and watch for signs of trouble.
2001 Siemens Airfield Solutions, Incorporated | 96A0027L | Page 21 |
All rights reserved | Issued 5/01 |
|
