Siemens RL-854 Action in the Event of a System or Component Malfunction, Maintenance and Repair

RL-854 Radio Control Unit
Type I, Style A		Safety
Operation (contd.)	•	Before starting this equipment, check all safety interlocks, fire-detection
		systems, and protective devices such as panels and covers. Make sure
		all devices are fully functional. Do not operate the system if these
		devices are not working properly. Do not deactivate or bypass
		automatic safety interlocks or locked-out electrical disconnects or
		pneumatic valves.
	•	Never operate equipment with a known malfunction.
	•	Do not attempt to operate or service electrical equipment if standing
		water is present.
	•	Use this equipment only in the environments for which it is rated. Do
		not operate this equipment in humid, flammable, or explosive
		environments unless it has been rated for safe operation in these
		environments.
	•	Never touch exposed electrical connections on equipment while the
		power is ON.

Action in the Event of a System or Component Malfunction

Do not operate a system that contains malfunctioning components. If a component malfunctions, turn the system OFF immediately.

•Disconnect and lock out electrical power.

•Allow only qualified personnel to make repairs. Repair or replace the malfunctioning component according to instructions provided in its manual.

Maintenance and Repair

Allow only qualified personnel to perform maintenance, troubleshooting, and repair tasks. Only persons who are properly trained and familiar with Siemens Airfield Solutions equipment are permitted to service this equipment.

•Always use safety devices when working on this equipment.

•Follow the recommended maintenance procedures in your equipment manuals.

•Do not service or adjust any equipment unless another person trained in first aid and CPR is present.

•Connect all disconnected equipment ground cables and wires after servicing equipment. Ground all conductive equipment.

•Use only approved Siemens Airfield Solutions replacement parts. Using unapproved parts or making unapproved modifications to equipment may void agency approvals and create safety hazards.

 2001 Siemens Airfield Solutions, Incorporated	96A0027L	Page 4
All rights reserved	Issued 5/01