Manuals / Pelco / Household Appliance / Home Security System

Pelco Dx8000 manual Reconnect The Data And Power Cables, C1606M 6/04

Models: Dx8000

1 40

Download 40 pages 3.7 Kb

Page 20

RECONNECT THE DATA AND POWER CABLES

IMPORTANT: Data and power cable connectors fit together only one way. All connectors are keyed to ensure that they are inserted in the proper orientation. Examine the drive, motherboard, and cable connectors before installation so that connectors are properly aligned. Make sure connectors are seated in the mating connectors securely, but do not force the connection. When installing drive power cables, push the connectors straight in or out; do not rock connectors back and forth.

1.Connect the CD-RW drive to the system motherboard using the data cable that you removed earlier:

a.Connect the gray connector of the data cable that came with your DX8000 to the CD-RW drive as illustrated in Figure 16.

b.Connect the black connector of the data cable to the newly installed hard drive. Refer to Figure 16.

c.Connect the blue connector of the data cable to the primary (blue) IDE connector on the system motherboard. Refer to Figure 16.

18	C1606M (6/04)

Image 20

Pelco Dx8000 manual Reconnect The Data And Power Cables, C1606M 6/04

Contents

DX8000 DX8000 Hard Drive Upgrade InstallationFor Single Drive Systems Digital Video RecorderPage PARTS LIST IntroductionTOOLS NEEDED Qty DescriptionGetting Ready Figure 2. Removing Power Cord from Unit C1606M 6/04Figure 3. ESD Protection Prepare Unit for Drive Installation OPEN THE UNIT CHASSISFigure 4. Removing Chassis Cover COMPONENT LAYOUT Move the Front Cross-Brace C1606M 6/04 Disconnect the Data and Power Cables 1a 1a2.Remove the power connectors from the hard drive Figure 9. Removing Hard Drive Power ConnectionHARD DRIVE POWER CONNECTOR C1606M 6/04Remove the Drive Mount Basket Replace the Primary Hard Disk REMOVE THE ORIGINAL DRIVEMOUNT THE NEW DRIVE C1606M 6/04C1606M 6/04 2.Mount the drive basket back into the chassisFigure 13. Replacing Drive Basket SET THE MASTER / SLAVE JUMPER Figure 15. Setting Drive Jumper FRONT OF DVRRECONNECT THE DATA AND POWER CABLES C1606M 6/041b 1a 1c C1606M 6/04Figure 17. Installing Power Connector C1606M 6/04Reassemble the Unit Figure 18. Replacing Front Cross-BraceFigure 19. Replacing Chassis Cover C1606M 6/04Figure 20. Restarting Unit Install Software on the New Drive CONFIGURE SYSTEM TO BOOT FROM CD/DVDMain AwardBIOS Setup UtilityAdvanced Power Boot Exit AwardBIOS Setup Utility PowerBoot Main8.Finalize BIOS changes Figure 23. DX8000 Recovery Dialog Box INSTALL SOFTWARE1.The DX8000 Recovery dialog box appears C1606M 6/04 Figure 24. Partition Size Verification Dialog Boxstored on your system’s C drive Figure 25. Proceed with Disk Restore Dialog Box AwardBIOS Setup Utility Advanced Power Boot ExitFigure 27. DX8000 BIOS Setup Main Screen MainAwardBIOS Setup Utility PowerBoot MainInitialize the New Drive Figure 30. Opening Drive Option Menu Figure 31. Selecting Allocation OptionPage Figure 34. PDB Database Creation Progress Bar RETURNS PRODUCT WARRANTY AND RETURN INFORMATIONWARRANTY Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & CanadaTel 800/289-9100 Fax 800/289-9150 International Tel 1-559/292-1981 Fax 1-559/348-1120