Taylor 2752 instruction manual Hex Screw, To mount the Wind Gauge Sensor to a mast, you will need

Page 10

Mounting the Wind Gauge Sensor

To mount the Wind Gauge Sensor to a mast, you will need:

•A 1” to 1 ¼” diameter mast (not included).

•Hardware to fasten the mast to the mounting location (not included).

1.If necessary, mount and ground a mast at the selected location (such as a roof or fence post) as directed in the instructions provided by the mast (not included).

2.Hold the Sensor base up against the mast (see illustration). The metal bar is horizontal to the mast. The Wind Vane Cups should point down, and the Compass/Wind Direction Indicator should point up.

3.Place 2 hex screws (included) into the 2 holes on the top of the base.

4.On the bottom of the base, place one of the “U” shaped metal plates (included) around the mast and through the screws. The mast will be between the plate and the sensor base.

5.Tighten 2 hex nuts (included) on the screws using an Allen wrench to hold the sensor to the mast.

6.Repeat with the bottom two holes to tightly secure the sensor to the mast.

Mounting Option: If another mast has been previously installed (for example, for mounting an antenna), the wind gauge sensor may be mounted on that existing mast. Or, if there is an existing piece of 1 to 1 ¼” diameter PVC pipe or other mast that is not the correct size (such as a kitchen sink vent), an extender may be placed on that pipe, then an extension mast may be attached to it.

Compass/Wind

 

Direction Vane

Mast

Wind Vane Cups

Hex

Screw

“U”

Shaped

Metal Plates

Hex Screw

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Digital Wireless Weather Station with Wind Speed Sensor How to use and read the data on the home receiver unit How to mount the Wind Gauge Sensor1 to 1 ¼ diameter Mast and hardware Remote Wind Gauge Sensor Unit Receiver UnitBacklight Button on top of Receiver Unit LCD Readout Receiver UnitMulti-Function Button Receiver Unit Wall Mount On back of Receiver UnitReceiver Unit Assembling the Wind Gauge Sensor Installing Home Unit Receiver Batteries Rta RieWind Gauge Sensor Mounting the Wind Gauge Sensor Hex Screw To mount the Wind Gauge Sensor to a mast, you will needRoof mount To mount the Wind Gauge Sensor into the groundNorth Mast To add a temperature/humidity Sensor purchased separately How to Read Temperatures and Other Displays How to Set the Clock and CalendarTo set the time and date Backlight Outdoor Wind ChillDisconnected Signals Low Battery WarningTrouble-Shooting FCC ID L5CW132TX-2 wind gauge transmitterTransmission Collision Range of temperature measurement SpecificationsOne Year Warranty Made to our exact specifications in China

2752 specifications

The Taylor 2752 is a notable model in the world of acoustic guitars, known for its exceptional craftsmanship and rich tonal quality. A part of the renowned Taylor Guitar Company's lineup, the 2752 brings together traditional craftsmanship and innovative technology, catering to a diverse range of players, from aspiring musicians to seasoned professionals.

One of the key features of the Taylor 2752 is its body shape, which is a Grand Auditorium style. This design combines the best aspects of a dreadnought and a concert body, offering a versatile sound that excels in both strumming and fingerpicking. The guitar is crafted from solid Sitka spruce for the top, paired with layered rosewood for the back and sides. This wood combination enhances the guitar’s projection and sustain, resulting in a warm, resonant tone. The solid top contributes to improved sound quality as it ages, allowing the tonal characteristics to blossom over time.

In terms of technology, the Taylor 2752 incorporates the Expression System 2 electronics. This innovative pickup system captures the guitar’s natural acoustic sound with unparalleled accuracy. It features a behind-the-saddle pickup and a patented preamp design that provides a wide dynamic range and low noise levels, making it ideal for live performances and studio recordings.

Another characteristic that sets the Taylor 2752 apart is its attention to detail in the construction and aesthetic appeal. The guitar features a beautiful, smooth finish and elegant appointments, including a striking bound neck and a unique rosette. The neck itself is made from tropical mahogany, offering a comfortable playability and enhancing the overall aesthetic of the instrument. The ebony fingerboard provides a luxurious feel and contributes to the guitar's tonal clarity.

The Taylor 2752 is equipped with a scale length of 25.5 inches, providing both tension and playability that suit a variety of playing styles. Additionally, it sports a nut width of 1.75 inches, allowing for easy finger placement and spacing, which is especially beneficial for players who utilize complex fingerings or alternate tunings.

Overall, the Taylor 2752 is an outstanding acoustic guitar that embodies the perfect blend of traditional design, modern technology, and musical versatility. With its stunning aesthetics, superior sound quality, and player-friendly features, it is a top choice for guitarists looking to elevate their musical expression.
Top Page Image Contents