Taylor 2752 instruction manual To add a temperature/humidity Sensor purchased separately

Page 13

Setting up Additional Temperature/Humidity Sensors (not included)

The remote Wind Gauge Sensor will transmit temperature and humidity readings from one location. With the purchase of an additional 1 or 2 temperature/humidity sensors (not included), this Wireless Weather System can monitor temperature and humidity readings in 1 or 2 additional locations. These remote sensors can be used to monitor temperatures in a garage, basement, child's room, wine cellar, or any other location within the transmission range. Please note these sensors can only monitor temperature and humidity; wind-related readings can only be measured by the one Wind Gauge Sensor that is included in this package.

To purchase temperature/humidity remote sensors (Taylor model 1438) visit www.partshelf.com.

To add a temperature/humidity Sensor (purchased separately):

1.Select a location for the remote sensor that is within the effective transmission range.

2.Lift off the bracket stand, located on the back of the remote sensor, to access the battery compartment cover.

3.Remove the 4 screws that secure the battery compartment cover and then remove the cover.

4.Assign channel 2 or 3 to the remote sensor by setting the slide switch inside the battery compartment. (Channel 1 is already assigned to the Wind Gauge Sensor and should not be used by any other remote sensors).

5.Insert 2 AAA alkaline batteries as indicated by the polarity symbols marked inside the battery compartment.

6.Press and hold the “CHANNEL” button on the front of the receiver unit to search for all remote sensor signals.

7.Press the Tx button in the remote battery compartment to send a transmission to the receiver. The red LED Indicator light will flash when a signal is transmitted. Remote unit temperature updates will then be transmitted around every 35 seconds.

8.Replace the battery compartment cover, replace and tighten screws and reattach the bracket stand.

9.When transmission connection is established, the respective temperature and humidity of the selected remote channel will appear on the home receiver's LCD screen. Note: If dashes are still displayed for that channel on the receiver unit, press the Tx button again to send another transmission.

10.Press the “CHANNEL” button to toggle between indoor and remote sensor temperature/humidity displays.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Digital Wireless Weather Station with Wind Speed Sensor How to use and read the data on the home receiver unit How to mount the Wind Gauge Sensor1 to 1 ¼ diameter Mast and hardware Receiver Unit Remote Wind Gauge Sensor UnitMulti-Function Button Receiver Unit LCD Readout Receiver UnitBacklight Button on top of Receiver Unit Wall Mount On back of Receiver UnitReceiver Unit Assembling the Wind Gauge Sensor Rta Rie Installing Home Unit Receiver BatteriesWind Gauge Sensor Mounting the Wind Gauge Sensor To mount the Wind Gauge Sensor to a mast, you will need Hex ScrewTo mount the Wind Gauge Sensor into the ground Roof mountNorth Mast To add a temperature/humidity Sensor purchased separately How to Read Temperatures and Other Displays How to Set the Clock and CalendarTo set the time and date Outdoor Wind Chill BacklightTrouble-Shooting Low Battery WarningDisconnected Signals FCC ID L5CW132TX-2 wind gauge transmitterTransmission Collision One Year Warranty SpecificationsRange of temperature measurement Made to our exact specifications in China

2752 specifications

The Taylor 2752 is a notable model in the world of acoustic guitars, known for its exceptional craftsmanship and rich tonal quality. A part of the renowned Taylor Guitar Company's lineup, the 2752 brings together traditional craftsmanship and innovative technology, catering to a diverse range of players, from aspiring musicians to seasoned professionals.

One of the key features of the Taylor 2752 is its body shape, which is a Grand Auditorium style. This design combines the best aspects of a dreadnought and a concert body, offering a versatile sound that excels in both strumming and fingerpicking. The guitar is crafted from solid Sitka spruce for the top, paired with layered rosewood for the back and sides. This wood combination enhances the guitar’s projection and sustain, resulting in a warm, resonant tone. The solid top contributes to improved sound quality as it ages, allowing the tonal characteristics to blossom over time.

In terms of technology, the Taylor 2752 incorporates the Expression System 2 electronics. This innovative pickup system captures the guitar’s natural acoustic sound with unparalleled accuracy. It features a behind-the-saddle pickup and a patented preamp design that provides a wide dynamic range and low noise levels, making it ideal for live performances and studio recordings.

Another characteristic that sets the Taylor 2752 apart is its attention to detail in the construction and aesthetic appeal. The guitar features a beautiful, smooth finish and elegant appointments, including a striking bound neck and a unique rosette. The neck itself is made from tropical mahogany, offering a comfortable playability and enhancing the overall aesthetic of the instrument. The ebony fingerboard provides a luxurious feel and contributes to the guitar's tonal clarity.

The Taylor 2752 is equipped with a scale length of 25.5 inches, providing both tension and playability that suit a variety of playing styles. Additionally, it sports a nut width of 1.75 inches, allowing for easy finger placement and spacing, which is especially beneficial for players who utilize complex fingerings or alternate tunings.

Overall, the Taylor 2752 is an outstanding acoustic guitar that embodies the perfect blend of traditional design, modern technology, and musical versatility. With its stunning aesthetics, superior sound quality, and player-friendly features, it is a top choice for guitarists looking to elevate their musical expression.
Top Page Image Contents