Where to Place Your Rain Gauge

How to Set Up Your Rain Gauge (cont.)

7.Place the base unit as close as possible to the rain cup sensor.

8.Press the “RE-SYNC” button on the back of the base unit. The base unit will search for a signal from the rain cup. The ““ icon appears in the bottom left corner of the LCD to indicate a transmission signal has been sent.

9.The IN temperature reading appears when transmission is successful.

10.If the IN temperature does not appear with 3 minutes, press the “RE-SYNC” button again. If the IN temperature still does not appear, refer to the Troubleshooting Section.

11.The remote will then automatically transmit updated readings to the base unit every 45 seconds.

TIP: Press ‘IN/OUT TEMP’ on the back of the base unit to switch between indoor and outdoor temperatures.

Where to Place Your Rain Gauge

Base unit location:

Place the unit indoors in a well-ventilated location away from direct sunlight.

Rain Collection Cup Sensor location:

1.Place the rain collection cup sensor on a level, horizontal surface for accurate readings.

2.If desired, use the 2 included screws to mount to a solid surface (such as a fence post or a garden shed. Or use the 2 included spikes to mount to the ground. (Please note the rain cup sensor must be horizontally upright for accurate rainfall readings.)

3.The transmission range of the rain cup sensor is 100 feet. The effective transmission range is vastly affected by obstacles such as walls, sheds, trees, etc. Try various set ups for the best results. Shorten the distance between base and rain cup sensor units when necessary.

Place the sensor in a dry, shaded area. Direct sunlight will heat the casing and inflate temperatures readings. Tip: Keep the rain cup sensor at least 3 feet from any obstructions which may affect rain collection. For example, do not place the sensor under a tree, as water dripping from leaves into the rain cup will overstate actual rainfall.

Important: Though the rain cup sensor is weather- and frost-resistant, it should never be completely submerged in water or left outside during snowy weather. Also please note the transmitter should not be left outdoors in temperatures at or below -4°F (-20°C). If the temperature drops to this level, move the rain cup sensor to an indoor area. Both the rain cup sensor and the base unit should be kept at temperatures between -4°F (-20°C) to 140°F (60°C). Extreme temperatures outside this range can permanently damage internal circuitry.

How to Display your Rain Gauge

Table top –
use the Table Stand	UP	MODE DOWN
on the back of the	UP	MODE DOWN
on the back of the
base unit.	TEMP	ALERT RE-SYNC HISTORY
	IN-OUT

Wall –

use the keyhole on the back of the base unit.

Wall Mount

Keyhole

Table Top

2753 specifications

The Taylor 2753 is a highly regarded acoustic guitar model that combines exceptional craftsmanship with innovative technologies. Known for its superb playability and tonal quality, the 2753 is a favorite among musicians of all skill levels. Its design features a grand auditorium body shape, which provides a balanced tone with impressive projection.

One of the standout features of the Taylor 2753 is its solid Sitka spruce top. This choice of wood ensures a bright and clear sound, allowing the guitar to excel in both strumming and fingerpicking styles. The back and sides of the instrument are crafted from layered sapele, which complements the spruce top by adding warmth and richness to the overall tone. The combination of these materials results in a well-rounded sound that is both powerful and nuanced.

The neck of the Taylor 2753 is constructed from maple, known for its durability and stability. This makes for easy playability and contributes to the guitar's excellent intonation and string action. The ebony fingerboard adds a touch of elegance while enhancing playability, providing a smooth surface for the fingers to glide over during play.

In terms of technology, the Taylor 2753 is equipped with the Expression System 2 (ES2) pickup, making it ideal for live performances. This innovative pickup system captures the guitar's natural acoustic tone, faithfully reproducing the sound when amplified. The ES2 system is designed to reduce feedback and maintain sound quality, making it a preferred choice for professional musicians.

Additionally, the Taylor 2753 features a distinctive aesthetic with its beautiful gloss finish and detailed binding. The rosette design further adds to the guitar’s visual appeal, making it not only a musical instrument but also a piece of art.

Overall, the Taylor 2753 is an outstanding acoustic guitar that offers a perfect blend of traditional craftsmanship and modern technology. Its superior sound quality, comfortable playability, and stunning aesthetics make it an excellent choice for anyone seeking a reliable and versatile instrument. Whether you’re a performer or a hobbyist, the Taylor 2753 promises to be a cherished addition to your musical journey.