Taylor 1525 instruction manual

Page 14

1. The receiver is intended for indoor use only. It is not sealed against moisture and could be damaged if used outdoors.

2. Do not immerse the unit in water.If you spill liquid on it, dry im- mediately with a soft, lint-free cloth.

3. Do not clean the unit with abrasive or corrosive materials.This may scratch plastic parts and corrode electronic circuits.

4. Do not subject unit to excessive force, shock, dust, temperature or humidity.This may result in malfunction, shorter electronic life span, damaged battery or distorted parts.

5. Do not tamper with the unit's internal components. Doing so will invalidate the warranty on this product and may cause damage. The unit contains no user-serviceable parts.

6. Do not mix old and new batteries. Do not mix Alkaline, carbon- zinc (standard) or Nickel-Cadmium (rechargeable) batteries. Do not dispose of batteries in fire. Batteries may explode or leak. Re- move the batteries if the units14will not be used for a long period of time.

7. Always read the instruction manual before operating this product.

8. Due to continuous product improvements,the displays shown in this manual may differ from the actual display.

Important:Though the remote unit is weather proof,it should be placed away from direct sunlight, rain, snow and should never be submerged in water.

Image 14
Contents WeatherGuideInstruction Sys em withManualRemote Sensor Temperature/Indoor Humidity Trends Plan your work day,play day,every day. Now that’s smartHow to Set up Your WeatherGuide System Remote S nsorsTransmission successful Base unit location Remote sensor locationPress and hold SET to start Clock setting Tomanually set the clockPage Temperature/Indoor Humidity Readings To Scroll feature the base unit canMidity Egrees in an hour Indicates Steady Temperature readings Soon be replaced Switch Between F Low Battery Indicator playsLight bu ton to turn the b cklight on for 3 seconds Teries are lowDisconnected Signals ProblemSolving Ansmissi CollisionPage Page 1525