Taylor 1525 instruction manual Tomanually set the clock, Press and hold SET to start Clock setting

Page 6

Press and hold SET to start

clock setting.

Press +C/F to change time digits and then SET to enter. Repeat for all settings.

Press SET after setting year. The clock is set.

Tomanually set the clock:

Your WeatherGuide™ has a 12 hour clock function.To set the clock:

1. Press and hold the “Set” button lo- cated on the back of the base unit. The hour digits will flash.

2. Press “+C/F” to change the hours. Press “SET” to enter.

3. Press “+C/F” to change the minutes. Press “SET” to enter.

4. Press6 “+C/F” to change the month. Press “SET” to enter.

5. Press“+C/F” to change the day.Press “SET” to enter.

6. Press “+C/F” to change the year. Press “SET” to enter.

7. The clock is now set.

Tip:Hold down the“C/F” button to ad- vance the digits quickly.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents WeatherGuideInstruction Sys em withManualRemote Sensor Temperature/Indoor Humidity Trends Plan your work day,play day,every day. Now that’s smartHow to Set up Your WeatherGuide System Remote S nsorsTransmission successful Base unit location Remote sensor locationPress and hold SET to start Clock setting Tomanually set the clockPage Temperature/Indoor Humidity Readings To Scroll feature the base unit canMidity Egrees in an hour Indicates Steady Temperature readings Soon be replaced Switch Between F Low Battery Indicator playsLight bu ton to turn the b cklight on for 3 seconds Teries are lowDisconnected Signals ProblemSolving Ansmissi CollisionPage Page 1525
Top Page Image Contents