McIntosh manual C200C Rear Panel Connections

C200C Rear Panel Connections

MAIN POWER CONTROL Output sends a turn-on signal to a McIntosh Power Amplifier when the C200C is turned On

TO C200 PREAMPLIFIER Connector accepts a 25 con- ductor cable that connects all control signals and power supply voltages from the C200C to the C200P

AMPLIFIER POWER CONTROL Outputs send a turn-on signal to a McIntosh Power Amplifier when the C200C Front Panel OUTPUT 1 and/or 2 is On

DATA PORTs send signals to compatible source components and allow remote control opera- tion

PASSTHRU Power Control input receives a turn-on signal from a McIntosh Home Theater Controller

Connect the C200C power cord to a live AC outlet. Refer to informa- tion on the back panel of the C200C to determine the correct voltage for your unit

Main Fuse holder, refer to information on the back panel of the C200C to deter- mine the correct fuse size and rating

ACCessory POWER CONTROL Outputs send a turn-on signal to McIntosh Source Component(s) and/or Power Controller when the C200C is On

The EXTernal SENSOR jack permits the connection of a McIntosh IR sensor for remote operation

10