Installation
The C200C and C200P can be placed upright on a table or shelf, standing on its four feet.The four feet may be re- moved from the bottom of both units when it is custom in- stalled as outlined below. The four feet together with the mounting screws should be retained for possible future use if the C200 Controller and Preamplifier are removed from the custom installation and used free standing. They also
can be custom installed in a piece of furniture or cabinet of your choice. The required panel cutout, ventilation cutout and unit dimensions are shown.
Always provide adequate ventilation for your C200. Cool operation ensures the longest possible operating life for any electronic instrument. Do not install the C200 di-
C200CustomFrontCabinetPanelCutout 
C200CSideView | Cbinet |
| CutoutOpeningforCustomMounting | |
Panel |
|
|
| |
inCustomCabinet | Front |
|
|
|
upport | CutoutOpeningforVentilation | Chssis | ||
C200CBottomView | Shelf | 2.54cm1" | 14" | Spacers |
1.35cm |
| 35.56cm | ||
| 7/32" |
|
| |
inCustomCabinet |
| CutoutOpening3514".56cm | 38.26cm | |
|
|
| forVentilation |
|
8