Tanaka AST-5000 manual Fuel Filter -2B, Spark plug Fig, Muffler Fig, Cylinder Engine cooling -4B

Page 14

AST-210,AST-5000

Owner’s Manual

 

 

 

Fuel Filter (Fig. 3-2B)

Drain all fuel from fuel tank and pull fuel filter line from tank. Pull filter element out of holder assembly and rinse element in warm water with detergent.

Rinse thoroughly until all traces of detergent are eliminated. Squeeze, do not wring, away excess water and allow element to air dry.

NOTE!

If element is hard due to excessive dirt buildup, replace it.

Spark plug (Fig. 3-3)

The spark plug condition is influenced by:

An incorrect carburetor setting.

Wrong fuel mixture (too much oil in the gasoline)

A dirty air filter.

Hard running conditions (such as cold weather).

These factors cause deposits on the spark plug electrodes, which may result in malfunction and starting difficulties. If the engine is low on power, difficult to start or runs poorly at idling speed, always check the spark plug first. If the spark plug is dirty, clean it and check the electrode gap. Readjust if necessary. The correct gap is 0.6 mm. The spark plug should be replaced after about 100 operation hours or earlier if the electrodes are badly eroded.

NOTE! In some areas, local law requires using a resistor spark plug to suppress ignition signals. If this machine was originally equipped with resistor spark plug, use same type of spark plug for replacement.

Muffler (Fig. 3-4)

Remove the muffler and remove excess carbon from the exhaust port or muffler inlet every 100 hours of operation.

Cylinder (Engine cooling) (Fig. 3-4B)

The engine is air cooled, and air must circulate freely around engine and over cooling fins on cylinder head to prevent overheating.

Every 100 Operating hours, or once a year (more often if conditions require), clean fins and external surfaces of engine of dust, dirt and oil deposits which can contribute to improper cooling.

NOTE!

Do not operate engine with engine shroud or muffler guard removed as this will cause overheating and engine damage.

www.tanakapowerequipment.com

13

custsvc@tanaka-ism.com

Image 14
Contents AST-210, AST-5000 Before using this unit AST-210,AST-5000 What is what ? Operator Safety Throttle control -1 B, 1C Assembly proceduresDrive shaft to engine -1 Drive shaft to engine AST-210Fig -1DInstallation of blade guard -6, 6B, 6C Installation of handle -2, 2BThrottle wire/stop cord AST-210 Other blade guards Fueling Operating procedures Fuel FigFuel Starting -2, 2B Stopping -2B Battery charging procedureOptionalAST-250 Cutting -4, 4B, 4C, 4D Stopping FigIdle speed adjustment T MaintenanceCarburetor adjustment -1, 1B Cleaning the air filterMuffler Fig Fuel Filter -2BSpark plug Fig Cylinder Engine cooling -4BBlade Fig Flexible drive shaft FigAngle transmission -5B Battery Removal AST-5000 Weekly maintenance Maintenance scheduleDaily maintenance Monthly maintenanceSpark arrestor Installation of free disk set optional -1, 1 BOptional Specifications V001001 Bicycle Style Handle Kit #748502 Cutting Attachments for Tanaka Trimmers and BrushcuttersBlade conversion Kit #748501

AST-210, AST-5000 specifications

The Tanaka AST-210 and AST-5000 are exceptional models in the lineup of outdoor power equipment, each designed to meet the varying needs of gardening professionals and enthusiasts alike. These machines are renowned for their reliability, performance, and advanced technological features.

The Tanaka AST-210 is a lightweight, efficient grass trimmer, making it ideal for residential use and smaller commercial tasks. Weighing only 10 pounds, it offers great portability without sacrificing power. A key feature of the AST-210 is its powerful 21cc two-stroke engine, which provides impressive cutting performance, allowing users to tackle thick grass and weeds effortlessly. The model is equipped with a dual-line cutting head that ensures a clean and precise finish.

One notable aspect of the AST-210 is its ergonomic design, which includes a comfortable, vibration-reducing handle. This feature allows for extended use without causing fatigue. Additionally, the trimmer has a quick-release coupling that enables easy attachment and detachment of various accessories, making it versatile for different gardening tasks. The Advanced Start Technology incorporated in the AST-210 makes it easier to start the engine with minimal effort.

On the other hand, the Tanaka AST-5000 takes performance and durability to the next level. This professional-grade grass trimmer boasts a 50.8cc two-stroke engine, delivering exceptional power suitable for extensive areas and rugged conditions. With a unique anti-vibration system, the AST-5000 enhances user comfort, allowing for prolonged periods of operation.

One of the standout features of the AST-5000 is its high-capacity fuel tank, which reduces the need for frequent refueling during larger projects. Its heavy-duty cutting head is designed for commercial use, capable of accommodating a variety of line sizes to tackle different types of vegetation. The trimmer also features a solid steel drive shaft for enhanced durability and performance under tough conditions.

Both the AST-210 and AST-5000 incorporate Tanaka's commitment to environmental responsibility, with low emission engines that comply with stringent regulatory standards. Each model is designed with user-friendly controls, ensuring that even novice users can operate them effectively.

In conclusion, the Tanaka AST-210 and AST-5000 represent a robust choice for those seeking reliable and efficient grass trimming solutions. With their advanced technologies, ergonomic designs, and powerful engines, they stand out in the competitive field of outdoor power equipment, catering to both home gardeners and professional landscapers.