Tanaka AST-5000, AST-210 Assembly procedures, Drive shaft to engine -1, Throttle control -1 B, 1C

Page 6

AST-210,AST-5000

Owner’s Manual

 

 

 

3. Assembly procedures

Drive shaft to engine (Fig.1-1)

•Apply a small amount of oil or grease to insert part of shaft tube, loosen shaft tightening bolt (1) and remove location bolts (4).

•Insert the throttle wire (3) through the hole of the shaft grip and connect the electrical coupling (2).

•Pull flexible inner shaft out of shaft tube about 3 " and insert it into the square hole in the clutch shaft.

Insert the shaft tube into the rubber damper on the clutch case until the location hole lines up on the shaft tube (5) and on the clutch case. If it will not go in far enough ' turn the shaft at the gear case end until the shaft tube drops into place.

*install location bolts, tighten location bolts and shaft tightening bolt.

Throttle control (Fig. 1 -1 B, 1C)

•Remove throttle trigger screw (1) and slide the throttle trigger assembly away from the shaft grip temporarily. Connect the throttle wire in the hole of the throttle trigger.

•Locate throttle trigger in its original position by squeezing the trigger, then slide the throttle trigger assembly back against the shaft grip then install and tighten the throttle trigger screw (1).

Drive shaft to engine (AST-210)(Fig. 1-1D)

Loosen tube locking bolt (1).

Insert the drive shaft into the clutch case of the engine properly until the marked position (2) on the drive shaft tube meets the clutch case.

NOTE!

When it is hard to insert drive shaft up to the marked position on the drive shaft tube, turn drive shaft by the cutter mounting end clockwise or counterclockwise. Tighten tube locking bolt lining up the hole in the shaft tube.

www.tanakapowerequipment.com

5

custsvc@tanaka-ism.com

Page 5 Page 7
Image 6
Page 5 Page 7
Contents AST-210, AST-5000 Before using this unit AST-210,AST-5000 What is what ? Operator Safety Throttle control -1 B, 1C Assembly proceduresDrive shaft to engine -1 Drive shaft to engine AST-210Fig -1DInstallation of handle -2, 2B Throttle wire/stop cord AST-210Installation of blade guard -6, 6B, 6C Other blade guards Operating procedures Fuel Fig FuelFueling Starting -2, 2B Battery charging procedure OptionalAST-250Stopping -2B Cutting -4, 4B, 4C, 4D Stopping FigIdle speed adjustment T MaintenanceCarburetor adjustment -1, 1B Cleaning the air filterMuffler Fig Fuel Filter -2BSpark plug Fig Cylinder Engine cooling -4BFlexible drive shaft Fig Angle transmission -5BBlade Fig Battery Removal AST-5000 Weekly maintenance Maintenance scheduleDaily maintenance Monthly maintenanceInstallation of free disk set optional -1, 1 B OptionalSpark arrestor Specifications V001001 Cutting Attachments for Tanaka Trimmers and Brushcutters Blade conversion Kit #748501Bicycle Style Handle Kit #748502

AST-210, AST-5000 specifications

The Tanaka AST-210 and AST-5000 are exceptional models in the lineup of outdoor power equipment, each designed to meet the varying needs of gardening professionals and enthusiasts alike. These machines are renowned for their reliability, performance, and advanced technological features.

The Tanaka AST-210 is a lightweight, efficient grass trimmer, making it ideal for residential use and smaller commercial tasks. Weighing only 10 pounds, it offers great portability without sacrificing power. A key feature of the AST-210 is its powerful 21cc two-stroke engine, which provides impressive cutting performance, allowing users to tackle thick grass and weeds effortlessly. The model is equipped with a dual-line cutting head that ensures a clean and precise finish.

One notable aspect of the AST-210 is its ergonomic design, which includes a comfortable, vibration-reducing handle. This feature allows for extended use without causing fatigue. Additionally, the trimmer has a quick-release coupling that enables easy attachment and detachment of various accessories, making it versatile for different gardening tasks. The Advanced Start Technology incorporated in the AST-210 makes it easier to start the engine with minimal effort.

On the other hand, the Tanaka AST-5000 takes performance and durability to the next level. This professional-grade grass trimmer boasts a 50.8cc two-stroke engine, delivering exceptional power suitable for extensive areas and rugged conditions. With a unique anti-vibration system, the AST-5000 enhances user comfort, allowing for prolonged periods of operation.

One of the standout features of the AST-5000 is its high-capacity fuel tank, which reduces the need for frequent refueling during larger projects. Its heavy-duty cutting head is designed for commercial use, capable of accommodating a variety of line sizes to tackle different types of vegetation. The trimmer also features a solid steel drive shaft for enhanced durability and performance under tough conditions.

Both the AST-210 and AST-5000 incorporate Tanaka's commitment to environmental responsibility, with low emission engines that comply with stringent regulatory standards. Each model is designed with user-friendly controls, ensuring that even novice users can operate them effectively.

In conclusion, the Tanaka AST-210 and AST-5000 represent a robust choice for those seeking reliable and efficient grass trimming solutions. With their advanced technologies, ergonomic designs, and powerful engines, they stand out in the competitive field of outdoor power equipment, catering to both home gardeners and professional landscapers.
Top Page Image Contents