McIntosh MCC406M owner manual How to Connect for Six Channels

Page 8

How to Connect for Six Channels

1.Connect a cable from the Control Center Amp On to the MCC406M ON Connector on the right side of the amplifier.

Note: All cables should be connected to the amplifier before connecting the DC power cables to the battery.

2.Connect a cable from a McIntosh Control Center with Power Guard to the MCC406M PG Connector on the right side of the amplifier.

3.Connect cables (up to 12 AWG) from six separate Loudspeaker Drivers to the MCC406M Power Amplifier Channels 1, 2, 3, 4, 5 and 6 Terminals, being careful to observe the correct polarities.

4.Connect a cable (up to 12 AWG) from the Subwoofer Loudspeaker Driver to the McIntosh Mono Power Am- plifier Output Terminals, being careful to observe the

Left

Front

Output

Power

Guard

Amp

ON

Right

Front

Output

correct polarities.

5.Connect audio cables from the Control Center Front Outputs to the McIntosh Electronic Crossover Inputs 1 and 2.

6.Connect audio cables from the McIntosh Electronic Crossover Low, Mid and High Outputs 1 and 2 to the MCC406M Power Amplifier Inputs 1, 2, 3, 4, 5 and 6.

7.Connect an audio cable from the McIntosh Electronic Crossover Sub Output to the McIntosh Mono Power Amplifier Input.

8.Connect the MCC406M to the vehicle battery termi- nals using size 4 AWG (Maximum) cables.

Note: It is advisable to place an in-line fuse of a suitable size as close as possible to the battery.

McIntosh Electronic Crossover

-Vehicle + Battery

Fuse

8

Image 8
Contents Power Amplifier Important Safety Instructions Customer Service Table of ContentsThank You Please Take a MomentIntroduction Performance FeaturesImportant Information Dimensions Installation Side Panel Cooling and Connections How to Connect for Six Channels How to Connect for Six Channels How to Connect for Five Channels How to Connect for Four Channels Right Loudspeaker SystemHow to Connect for Three Channels Left Right Loudspeaker System Subwoofer Top Panel Controls, Display and Switches Power Guard LEDHow to Operate the MCC406M Introduction Page How to Operate in Three Channel Mode How to Replace the Fuses MCC406M Block Diagram Page Page Specifications Packing Instructions McIntosh Laboratory, Inc Chambers Street Binghamton, NY

MCC406M specifications

The McIntosh MCC406M is a high-performance mono audio amplifier that epitomizes the luxurious craftsmanship and cutting-edge technology for which McIntosh is renowned. Designed for audiophiles who demand the utmost in sound quality and power, the MCC406M stands out with its impressive specifications and features.

One of the primary characteristics of the MCC406M is its robust power output. It delivers a staggering 400 watts of continuous power into a 2-ohm load, ensuring that it can drive even the most demanding speakers effortlessly. The amplifier operates with a high damping factor, which permits precise control of the speaker's performance, yielding tighter bass and enhanced overall fidelity.

The MCC406M incorporates advanced technologies that ensure optimal performance and reliability. At the heart of the amplifier is the McIntosh patented Autoformer, which allows it to deliver the same output power regardless of the speaker’s impedance, be it 2, 4, or 8 ohms. This feature not only enhances compatibility with a wide range of speakers but also ensures consistency in audio performance.

Another notable technology is the Power Guard® system, which monitors and adjusts the amplifier's output to prevent clipping and distortion, safeguarding both the amplifier and connected speakers. This feature is crucial for maintaining sound integrity even at high listening levels, allowing for an enjoyable and reliable listening experience.

In terms of design, the MCC406M embodies McIntosh’s signature aesthetic with its sleek black glass front panel, illuminated logo, and glowing watt meters, which provide a visual representation of the output power. This sophisticated appearance makes it a standout piece in any audio system.

Additionally, the MCC406M features a balanced audio input and a variety of connections, accommodating different setups and ensuring maximum compatibility with various preamplifiers. Its compact design also allows for versatility in placement, whether in a dedicated audio room or a living space.

Overall, the McIntosh MCC406M amplifier combines powerful performance, advanced technologies, and elegant design, making it a premium choice for those seeking to elevate their audio experience. Whether for music appreciation or home theater applications, this amplifier delivers exceptional sound quality, embodying the McIntosh legacy of excellence.