Venting, Oil Burner | North Star M157594I instruction

Installation Instructions

Venting

DANGER: Do not run machine indoors or in an enclosed area without adequate ventilation, or in areas where flammable vapors, (gasoline, solvents, etc.) may be present. Do not vent exhaust gases into a wall, a ceiling, or a concealed place.

CAUTION: All venting must be in accordance with applicable state and federal laws, and local ordinances. Consult local heating contractors.

If the pressure washer is to be used in an enclosed area, a flue must be installed to vent burner exhaust to the outside atmosphere. Be sure the flue is the same size as the burner exhaust vent on the pressure washer lid. Poor draft will cause the pressure washer to soot and not operate properly. When selecting the location for installation, beware of poorly ventilated locations or areas where exhaust fans may cause an insufficient supply of oxygen. Proper combustion can only be obtained when there is a sufficient supply of oxygen available for the amount of fuel being burned. If it is necessary to install a unit in a poorly ventilated area, outside fresh air may have to be piped to the burner and a fan installed to bring sufficient air into the unit. Locate the pressure washer in such a manner that the flue will be as straight as possible and protrude through the roof at a proper height and location to provide adequate draft. This oil fired unit must have a draft controller installed in the flue (Part #18007 call 1-800-270-0810 to order). A draft controller will permit proper upward air flow of exhaust flue gases.

Oil Burner

Burner Air Adjustment: The oil burner is preset and performance tested at the factory (elevation 1100 feet). Different altitudes may require a one-time initial burner correction.

Air Band

White

Arrow

	Locking	Burner
	Screw	Burner
	Screw

1.) Turn the engine and heat switches ON (Refer to “Operation” for details). Have someone operate the spray gun so the burner fires.

2.) Loosen the locking screw and close the air band until black smoke appears from the burner exhaust vent. Note the position of the white arrow on the air band.

3.) Slowly open the air band until white smoke just starts to appear.

4.) Turn the air band half way back to the black smoke position previously noted. Tighten the locking screw.

5.) Fine tune the burner air by loosening the shutter lock screw and turning the shutter until the exhaust is cleanest. Tighten the shutter lock screw.

Shutter

Lock Screw

CAUTION: If white smoke appears from the burner exhaust vent during start-up or operation, discontinue use and readjust air bands.

NOTE: If a flue is installed, have a professional serviceman adjust your burner for a #1 or #2 smoke spot on the Bacharach scale.

M157594I specifications

North Star M157594I is an advanced model in the realm of cutting-edge engineering and design, catering primarily to those seeking reliable performance in demanding environments. This particular model is designed to meet the needs of professionals in various industries, offering an array of features that enhance its usability and efficiency.

One of the defining attributes of North Star M157594I is its robust construction. Built with high-grade materials, it ensures durability and longevity, making it ideal for outdoor and rugged applications. The design has been optimized to withstand harsh conditions, which is crucial for users who operate in extreme climates or challenging terrains.

In terms of technology, the M157594I incorporates a state-of-the-art power management system that maximizes efficiency. This system not only ensures prolonged operation but also minimizes energy consumption, contributing to lower operational costs. Furthermore, the model is equipped with advanced connectivity features, allowing seamless integration with various devices. This connectivity is significant for users who require real-time data monitoring and remote operation capabilities.

The user interface of the North Star M157594I has been designed with simplicity and functionality in mind. The intuitive controls allow users of all skill levels to operate the model effectively. Additionally, it boasts advanced safety features, including automatic shut-off systems and overload protection, which are critical in preventing accidents and ensuring the well-being of operators.

Another notable aspect of the M157594I is its versatility. It can be used across a wide range of applications, from industrial operations to environmental monitoring, making it a valuable asset for businesses looking to streamline their processes. The adaptability of the model is further enhanced by its compatibility with various attachments and accessories.

The North Star M157594I stands out not only for its technical specifications but also for its commitment to environmental sustainability. The design includes features that reduce its carbon footprint, aligning with contemporary demands for eco-friendly solutions.

In conclusion, the North Star M157594I represents a significant advancement in its field, combining durability, technological sophistication, and user-friendliness. Its extensive feature set makes it an excellent choice for professionals seeking a reliable tool to tackle their diverse operational challenges.