Generator Features

References 1-3 Circuit Breakers.

•Reference 1 - two 40 amp (A) push-to-reset circuit breakers.

•Reference 2 - one 30 amp (A) push-to-reset circuit breaker.

•Reference 3 - two 20 amp (A) push-to-reset circuit breakers.

Reference 4 - Voltmeter. Voltmeter needle should be in green area during all generator load conditions. The black line in the center on the green area is 120V. During no load conditions, the needle should be at or above the black line.

References 5-6 120V Receptacles.

•Reference 5 - The generator has a side panel with two 120 volt (V) 20 amp (A) straight blade receptacle duplexes (two receptacles in a common housing). National Electrical Manufacturer’s Association (NEMA) number is 5-20R.

•Reference 6 - This twistlock is a 120V 30A receptacle, NEMA number L5-30R. This receptacle accepts NEMA plug number L5-30P, which is supplied with the generator.

Reference 7 - 120/240V Receptacle. This straight blade receptacle is 120/240V 50A, but has two 40A circuit breakers to limit maximum current. This receptacle accepts a NEMA plug number 14-50P, which is supplied with the generator.

ALWAYS use grounded male plugs. The neutral line of the generator is mechanically grounded to the frame. Matching NEMA male plugs must always be used.

Reference 8 - 28 mm diameter Shaft. The shaft is 2.375” long and has a 8 mm key way. A taper bore or split bore bushing is recommended for attaching sheaves. 8 mm X 1.75” key supplied with generator.

Reference 9 - Ground Screw . Ground the generator via the ground screw, to a copper pipe or rod that is driven into moist soil.

Reference 10 - Mounting feet. Use these three locations to attach the generator head in place with 7/16” grade 5 bolts. Mounting plates (item #165935) for mounting generator to a cement pad are available through Northern and the NorthStar parts catalog.

Reference 11 - Fan Vents. Never block the vent slots or insert objects through the slots. The closest object should be a minimum of 3 feet away from the vents.

INTRODUCTION

Before attempting to mount your generator, thoroughly study the instructions and cautions in this manual to assure you are fully acquainted with the operation of all components of this generator. Proper preparation, operation and maintenance will result in operator safety, best performance and long life of the generator.

NorthStar is constantly improving its products. The specifications outlined herein are subject to change without prior notice or obligation. The purchaser and/or user assumes liability of any modification and/or alterations on this equipment from original design and manufacture.

Before using, the user shall determine the suitability of this product for its intended use and assumes liability therein.

ANSI SAFETY DEFINITIONS

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme situations.

WARNING indicates a potentially hazardous situation which, if not avoided, could result in a death or serious injury.

CAUTION indicates a potentially hazardous situation, which if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

RULES FOR SAFE OPERATIONS

Safety precautions are essential when operating this generator. Respectful and cautious operation will considerably lessen the possibilities of a personal injury. This manual will warn of specific personal injury potential, and these will be designated by the symbol:

WARNING This generator is equipped with a grounding screw, located on the generator frame for your protection. Always complete the grounding path from the generator to a copper pipe/rod that is driven into moist earth, to prevent electrical shock.

ALWAYS use electrical cords that are in good condition. Worn, bare, frayed or otherwise damaged cords can cause electric shock.

NEVER operate the generator, or handle any electrical equipment while standing in water, while barefoot, while hands are wet or while in the rain or snow. Electric shock may result.

ALWAYS use a ground fault circuit interrupter (GFCI) in damp or highly electrical conductive areas and on construction job sites to prevent electric shock.

10000 BDG specifications

Northern Industrial Tools 10000 BDG is a versatile and powerful tool designed for both professional and amateur users. This heavy-duty tool is noted for its exceptional performance and reliability, making it a prime choice among those who require quality in their equipment.

One of the most notable features of the Northern Industrial Tools 10000 BDG is its robust construction. Built with high-quality materials, this tool is designed to withstand rigorous use and harsh conditions. Its durable exterior is resistant to wear and tear, ensuring longevity and consistent performance over time.

The 10000 BDG model boasts an impressive motor that delivers substantial power, enabling it to tackle a myriad of tasks with ease. Whether you're working on a construction site, doing automotive repairs, or managing a DIY project at home, this tool provides the versatility needed to complete tasks efficiently. The powerful motor is further complemented by an ergonomic design that allows for easy handling and operation, reducing user fatigue during extended use.

Another significant feature of this tool is its array of advanced technologies. Northern Industrial Tools has incorporated cutting-edge innovations that enhance the functionality of the 10000 BDG. The inclusion of a variable speed control allows users to adjust the speed according to their needs, making it suitable for a wide variety of applications. The tool also comes equipped with a built-in safety system, which includes an automatic shut-off feature that activates in case of overheating, ensuring user safety and preventing damage to the tool.

In terms of characteristics, the Northern Industrial Tools 10000 BDG is notably lightweight, making it easy to transport and maneuver. This feature is particularly beneficial for professionals who frequently move between job sites. The compact design allows it to be stored easily when not in use, saving valuable space in workshops or garages.

Furthermore, the 10000 BDG is designed for easy maintenance. Routine upkeep can be performed without requiring specialized tools, ensuring that users can keep their equipment in optimal condition with minimal effort.

In summary, the Northern Industrial Tools 10000 BDG stands out as a durable, powerful, and user-friendly tool that meets the demands of various tasks. Its advanced features and technologies make it a reliable choice for anyone needing an efficient and robust tool capable of delivering exceptional performance in diverse conditions.