
| ® |
| NATIONAL HYDRO 70" TRIPLEX |
Lubrication | 20 |
Painting | 20 |
BeltReplacement | 20, 21 |
Coupling Alignment | 21 |
Storage | 22 |
General Instructions | 22 |
Engine | 22 |
Battery | 22 |
Tractor | 22 |
Tires | 22 |
Starting After Storage | 22 |
Trouble Shooting Guide | 23 |
Engine Will Not Start | 23 |
Tractor Will Not Move | 23 |
Reel Not Turning | 23 |
Reel Will Not Cut | 23 |
Lubrication | 24, 25 |
Electrical Schematic | 26 |
Parts List and Ordering Information | 27 |
Tank and Rear Fork Assembly | 28, 29 |
Steering Tower Assembly | 30, 31 |
Engine and Footrest Assembly | 32, 33 |
Traction Pedal and Pump Assembly | 34, 35 |
Lift Arm and Drive Assembly | 36, 37 |
Front Cutting Unit Assembly | 38, 39 |
Rear Cutting Unit Assembly | 40, 41 |
Hydraulic Hose and Line Assembly | 42, 43 |
Hydraulic Fitting Assembly | 44, 45 |
Basket Assembly | 46 |
Belt Too | l46 |
Height Of Cut Bar | 47 |
Pump | 47 |
Wheel Motor | 48 |
Lift Valve | 48 |
Lift Cylinder | 49 |
Front Roller Scraper Kit | 49 |
Rear Roller Scraper Kit | 50 |
Valve Block | 50 |
Warranty | 51 |
1—INTRODUCTION
This manual has been prepared by National Mower Company as an aid to users for assembly, maintenance, adjustment and ordering replacement parts. Additional information will gladly be furnished by calling or writing National Mower Company.
Please furnish us with the Model Number, Serial Number and Date of Purchase when contacting us about your machine. Designations of right, left, front and rear are used as if the operator was sitting in the mower seat.
2—RECEIPT OF SHIPMENT
Carefully inspect your machine and crate for damage that could have occured during shipment. If damages or shortages are noted, have the transportation company’s representative note this on the bill of lading.
NOTE
Claims for shipping damages must be noted by the consignee at the point of destination and filed with the transportation company that delivers the shipment.
5