National Mower 68 SR, 68 DL owner manual Safety and Control Decals

07587 – IGNITION KEY (Model 68 SR) (located on top surface of main belt guard)

To start the engine, place the main clutch and all cutting unit clutches in neutral. Turn the key to the clockwise position and pull on the recoil starter. Use the choke as required.

To stop the engine, turn the key to the full counterclockwise position.

Refer to the engine manual for details on proper engine operation.

Disengage cutting unit clutches, engage the parking brake and remove the key whenever leaving the mower seat.

07588 – PARKING BRAKE LEVER (located on top surface of main belt guard)

07599 – WARNING DECAL

(located on instrument cluster [68 DL] or main belt guard [68 SR])

Read and understand the information in the Owner’s Manual be- fore operating this mower.

Read and understand the information in the Owner’s Manual before attempting to repair, service, or maintain this mower.

Turn off the mower engine, remove the ignition key, and disconnect the engine spark plug before

attempting to repair, service, or maintain this mower.

Move the parking brake lever

WARNING

The engine exhaust from this prod-

forward to set the brake, rearward to release the brake. Driving the mower with the parking brake set will cause excess wear on the brake mechanism.

07589 – SERVICE BRAKE PEDAL (located on top surface of main belt guard)

Press the brake pedal with your right foot to stop the mower. You must also release the main engine clutch in order for the mower to come to a complete stop.

uct contains chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect.

engaged. Serious injury or death can result from loss of control.