National Mower 68 DL, 68 SR owner manual Receipt of Shipment, Uncrating Instructions

Carefully inspect your machine and crate for damage that could have occurred during shipment. If damages or shortages are noted, have the transportation company’s representative note this on the bill of lading.

Note: Claims for shipping damages must be noted by the consignee at the point of destination and filed with the transportation company that delivers the shipment.

UNCRATING INSTRUCTIONS

CAUTION Wear protective gloves. Steel banding is sharp. Handle cutting

units carefully. Reels rotate freely and are very sharp.

In order to prevent possible damage to the machine or personal injury, the following uncrating procedure must be followed:

1. Position Crate (1) on a hard, level surface.

2Cut and remove all Steel Banding (2). Remove the entire top of the crate.

3.Unbolt Seat (3) from crate bracing and lay seat aside for installation later.

4.Lift Rear Cutting Unit (4) off the crate supporting members and set aside for later attachment.

5.Make sure Wing Cutting Units (5) are in their upright positions, secured to the mower frame with Wing Cutting Unit Latches.

6.Knock down all sides of crate and remove. Roll mower backwards off of crate base.